Jump to content
SAU Community

S13 Onevia, Mildly Modified Sr20det 5spd (reg'd Until March 2010)

R32gts-t
 Share

Recommended Posts

R32gts-t Experienced

R32gts-t

Posted
Posted

Blue 1990 S13 Onevia

Reg'd until March 2010

Body Work:

Blue/ Purple pearl paintwork

Black bonnet raised at the rear for airflow

Black Shaved boot lid

Type x 180sx side skirts

Custom one off rear pods

"Freedom Parts Project" front bar with genuine type x 180sx front parkers and indicators

Hand flared rear quarter guards

shaved aerial hole

Suspension/Brakes

Fully adjustable coilover suspension (very firm ride)

(Shock body and spring seat adjustment)

Front: Kei Office struts with camber tops

Rear: JIC Struts

S15 5 stud conversion (brand new 7/4/09 front hubs with bearings have receipt)

S15 rear subframe and diff

Cusco front strut brace

Custom rear strut brace

Custom brake master cylinder stopper

S14 wheels with hankook rubber

Engine/Driveline

Clean SR20det (Oil stays clear colour for many km's after oil change) and runs very smoothly.

S14 5 speed gearbox

Heavy duty cushion button clutch

Yashio Factory twin core radiator

13inch Thermo Fan mounted inside factory radiator shroud, with in cabin factory switch (whilst retaining factory engine fan)

Trust Airinx pod filter ( i will include stock airbox with k&n panel filter)

Z32 Air flow meter

Custom Stainless intake pipe

S14 jap spec T28 with HKS Actuator

R32 GTR Intercooler

Heat wrapped exhaust manifold

3inch front pipe

3 inch hi flow cat

3 inch stainless steel cat back

Electronics/Interior

GTR fuel pump

Greddy Emanage Computer with Injector control harness and air fuel control harness tuned for maximum safety by Protek.

Greddy Profec electronic boost controller set to 12psi

Greddy white face Boost Gauge

Greddy white face Water temp gauge

Tomei air fuel ratio gauge (not hooked up)

Omori exhaust temp gauge (not hooked up)

Momo steering wheel

S14 front seats

Aircon and Sound deadening has been removed

JVC Headunit (not installed and no speakers)

The car comes with Victorian VASS certificate and is registered until late March 2010

I can "assist" a buyer with RWC. (the main things are pod and too low, i have an aibox and the susp is adjustable)

Price; $10,500 ono with s14 wheels.

Now $10,000 with s14 wheels MAKE A REASONABLE OFFER, IT MUST SELL SOON!

or

$12,000 with meisters.

will consider swaps but not after modified car.

Located in Vic.

speedo is inaccurate, due to s15 rear diff upgrade, I will include a Jaycar electronic speedo correction kit for the buyer.

this car is well cared for, has been garaged since i imported it late 2005...

car is also advertised on carsales:

http://www.carsales.com.au/all-cars/privat...id=11ECB169BD5D

thanks,

greg-

Here are some up to date pictures... thanks for looking.

DSC07031.jpg

DSC07035.jpg

DSC07037.jpg

DSC07038.jpg

DSC07039.jpg

DSC07043.jpg

DSC07059.jpg

DSC07069.jpg

DSC07070.jpg

DSC07072.jpg

DSC07073.jpg

DSC07090.jpg

DSC07103.jpg

Beer Baron Grand Master

Beer Baron

Posted
Posted

it's not that far. in fact I bought my silvia in melbourne. it's a good chance to fly down, pick-up car, then enjoy one of the nice vic race tracks and then drive it back. :) seems like pretty good value to me too.

smasht Collaborator

smasht

Posted
Posted

That's true, but I had a mate who bought his car from ACT and drove it back and have heard nothing but negative comments when it comes to transfering the rego to NSW via RTA :(~

If someone can convince my differently then I may fly down :D

R32gts-t Experienced

R32gts-t

Posted
  • Author
Posted

i'm not familiar with nsw rta,

a friend of mine recently bought a VW bora from nsw, when it arrived in melbourne he took it to vicroads with a rwc and the reg transfer form and that was it.

it would be worth checking with the rta to see if the fact that the car is an import will subject it to more scrutiny...

the vass certificate that comes with the car may or may not be relevant in nsw, but the car is already registered so it "shouldn't" be an issue.

thanks,

greg

J34 Proficient

J34

Posted
Posted
That's true, but I had a mate who bought his car from ACT and drove it back and have heard nothing but negative comments when it comes to transfering the rego to NSW via RTA :)~

If someone can convince my differently then I may fly down :woot:

Have you ever heard anything but negative comments about NSW RTA????

R32gts-t Experienced

R32gts-t

Posted
  • Author
Posted

Queens Birthday Price Drop

$9500 with s14 wheels

$11,500 with work meisters.

First in best dressed.

call me to arrange a viewing over the weekend.

0401 873 739

Greg-

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
0siris Apprentice

0siris

Posted
Posted (edited)
Deposit has been taken, so the car is sold pending full payment...

looks like it's heading across Bass Straight!

Yeah my mate is buying her she looks and sounds like a sweet drive.

tassie here she comes.

Edited by 0siris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...