Jump to content
SAU Community

Recommended Posts

OK folks, with the final results accounted for and after much deliberation, I’d like to present the first SAU-SA Club, Board of Committee Members.

Without going into too much detail, I polled outright for 2 positions but unfortunately can’t (for obvious reasons) fulfil both positions. I’ve therefore taken into consideration all votes and who I agree would better represent the two positions then taken a step back. In consideration of the remaining votes and by unanimous decision by the new President and Secretary, I’ve accepted the offer of another position in the committee.

Here is the 1st SAU-SA Club Board:

Shane (RBWARE) - President

Shane has previous club experience, public recognition, knowledge of the motorsport industry and the persona that the club needs if it is to get off the ground successfully.

Pete (SLED) - Vice President

Ruby (RubyRS4) - Secretary

This is a hard position to fill and a very important one. It’s a “no brainer” that without all the very hard work that Ruby has put into getting this thing off the ground (not to mention all the rubbish that he’s had to put up with), that he would be perfect for this role and to be honest, if he didn’t accept this position, we’d be scratching our heads right now.

Nene (Nene260RS) - Treasurer

Nene is a popular choice for this position. Working in a bank makes this a “no brainer” as well. Although Nene will have her hands full with a new arrival in a few months, Ruby and others have offered their full support behind her.

Cara (Miss34) - Events Coordinator

Cara was an outright vote getter for this position obviously by the fact that she has the runs on the board with her organizational skills and enthusiasm to make things happen.

Damo (Damo-R34) - Web Design/Editor

Damo has shown enthusiasm and has the resources that he can pull from to fulfil this position well. The fact that he has shown eagerness, a determination to be involved and maturity beyond his years, tells me that he’ll be an asset.

Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/
Share on other sites

Congrats to all on the Committee ... and congrats to all who joined and who cast their votes. You're all still an important part of it, and without your support there would be no club. :D

Now that we have names of Committee members, we can now start getting forms in for CAMS affiliation, bank account, etc. I'll give Directors a call tomorrow and book a table/room for (say) 7.30pm next Friday (5/6/2009)? There will be much to discuss, and much for the club to offer its members.

Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/#findComment-4623152
Share on other sites

I'll give Directors a call tomorrow and book a table/room for (say) 7.30pm next Friday (5/6/2009)? There will be much to discuss, and much for the club to offer its members.

Congrats to the chiefs voted in, and good luck with it all!!

Ruby, As we have our monthly meeting at the Directors, i would suggest to them that you will be looking to hold a meeting on, for example every 3rd tuesday of the month or something like that, book it in early and everyone in the club will know when the meetings are and have no excuses for missing it, Just a suggestion!

EDIT: oh and thats the room upstairs, ours is every 4th monday in the month, you might want to make yours every 4th Tuesday and they can leave the tables out!!

Edited by Deluxe
Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/#findComment-4623202
Share on other sites

Ruby, As we have our monthly meeting at the Directors, i would suggest to them that you will be looking to hold a meeting on, for example every 3rd tuesday of the month or something like that, book it in early and everyone in the club will know when the meetings are and have no excuses for missing it, Just a suggestion!

EDIT: oh and thats the room upstairs, ours is every 4th monday in the month, you might want to make yours every 4th Tuesday and they can leave the tables out!!

Thanks for the tip Deluxe. I'm planning our first pow-wow (not really an official monthly meet, but a meeting in any case to intro the team and talk about the to-dos), hopefully next Friday. But I'll contact the others first and find a suitable time for all. Then I'll run past them what you've mentioned and see how it fits in with all. One problem is my studies, which can fall on a Tuesday night. But I should be able to control that at enrolment time.

:)

Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/#findComment-4623682
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...