Jump to content
SAU Community

Recommended Posts

I can't post the pics in this thread but I think this is worthy of the awesome thread... R33 2500R GT-X 1

http://www.skylinesaustralia.com/forums/-t...t&p=4963559

that is awesome!!!!!

gotta read up on this more - never heard of it...

:D

NISMO PROTO GTX-1 2500R

(IVE BEEN MEANING TO GET THIS UP FOR AGES - APOLOGIES FOR THE DELAY !!)

HERE IS NISSAN'S / NISMO'S / OMORI FACTORY'S (WELL MINE ACTUALLY) 1993/1995 R33 SKYLINE PROTOTYPE SINGLE TURBO 2.5 LITRE REAR WHEEL DRIVE 4 WHEEL STEER NO ABS SPORTS COUPE "BITUMAN SNIFFING" STRAIGHT SIX THAT PROVED TOO POWERFUL FOR A JAPANESE DOMESTIC MARKET RELEASE. ONLY 3 OF THESE EACH HAVING SLIGHTLY DIFFERING SPECIFICATIONS WERE BUILT WITH THIS CAR PRODUCTION "NO. 2" (P002) THE ONLY COMPLETE AND INTACT EXAMPLE KNOWN TO EXIST.

BEST SUITED TO WIDE OPEN SPACES THIS CAR COMES INTO ITS OWN AT AROUND 170KPH (TOP SPEED 285KPH) WHERE ITS IMPECCABLE BALANCE OF RAW POWER AND CRISP "POINT & SHOOT" RESPONSIVE HANDLING CAN BE CONSISTENTLY ADMIRED ENJOYED AND RESPECTED.

POWER - 460PS

POWER - AT THE REAR WHEELS - 273.8KW

POWER - AT THE FLYWHEEL - 375KW

POWER TO WEIGHT RATIO - 0.19KW/KG

ENGINE HARDWARE:

RB-X GT 1 BLOCK - NISMO INTERNALS - 600CC NISMO INJECTORS - GT-R FUEL RAIL AND INJECTOR CRADLE - CARBON FIBRE COLD AIR INTAKE WITH APEXI AIR FILTER - TRUST TD05 JOURNAL BUSH TURBO CHARGER - CUSTOM NISMO INTERCOOLER - EXTRUDE HONED PLENUM - PLUMB BACK BLOW OFF VALVE - NISMO 4.2L PER MIN. FUEL PUMP - SPLITFIRE IGNITION SYSTEM - APEXI POWER FC ENGINE MANAGEMENT SYSTEM - GREDDY PROFEC SPEC B II BOOST CONTROLLER - OIL COOLER - 3IN FRONT PIPE - 3IN STRAIGHT THROUGH MANDREL BENT EXHAUST SYSTEM WITH 4IN FUJITSUBO CANNON - Z32 AIR FLOW METER - APEXI ELECTRONIC BOOST GUAGE.

DRIVETRAIN:

GT-R GEAR SET - EXEDY CERAMIC 3 PUCK CLUTCH AND LIGHT WEIGHT FLYWHEEL - GT-R AXLES - NISMO 1.5 LIMITED SLIP DIFFERENTIAL WITH 4.4 FINAL DRIVE RATIO.

SUSPENSION / BRAKES:

BILSTEIN TRACK SHOCK ABSORBERS FRONT AND REAR WITH TANABE SPORT SPRINGS (LOWERED 20MM) - GT-R STRUT BRACES AND SWAY BARS FRONT AND REAR - BREMBO GT-R BRAKE CALIPERS WITH DBA 5000 SLOTTED ROTORS FRONT AND REAR - NISMO MASTER CYLINDER BRACE - ENDLESS COMPETITION BRAKE PADS.

WHEELS AND TYRES:

17IN X 9IN R33 GT-R WHEELS - DUNLOP SPEC-R 245/45/17 TYRES.

BODYWORK:

NISSAN GUNMETAL PAINTWORK (KH2) - GT-R STYLE FRONT BAR LIP AND GRILLE - GANADOR AERO MIRRORS - GT-R REAR WING ASSEMBLY WITH N1 CARBON FIBRE BLADE - BADGES DECALS AND IDENTIFICATION PLATES BEARING "NISSAN" "OMORI FACTORY" "NISMO" "GTX-1" "2500R" "RB-X GT 1" "P002" AND "PROTO".

INTERIOR:

GT-R FRONT AND REAR SEATS - NISMO STEERING WHEEL GEAR KNOB AND PEDALS - APEXI REV/SPEED METER - GREDDY TURBO TIMER - DEFI OIL/WATER TEMP/PRESSURE GUAGES - KENWOOD KDC 2020 HEAD UNIT WITH 600W AMPLIFIER FRONT SPLITS MIDS/TWEETERS REAR PARCEL SHELF 2 WAY MIDS AND BOOT MOUNTED 10IN SUB WOOFER.

WELL I GUESS THATS ABOUT IT...... OH YEAH !.....

SORRY - BUT ITS NOT FOR SALE :)

CHEERS MALCOLM :)

post-9783-1208757733_thumb.jpgpost-9783-1208759372_thumb.jpgpost-9783-1208759749_thumb.jpgpost-9783-1208760061_thumb.jpg

post-9783-1208760410_thumb.jpgpost-9783-1208761168_thumb.jpgpost-9783-1208761710_thumb.jpgpost-9783-1208776274_thumb.jpg

post-9783-1208762118_thumb.jpgpost-9783-1208762262_thumb.jpgpost-9783-1208766628_thumb.jpgpost-9783-1208766885_thumb.jpg

post-9783-1208767672_thumb.jpg post-9783-1208767805_thumb.jpgpost-9783-1208769982_thumb.jpg

post-9783-1208768097_thumb.jpgpost-9783-1208768231_thumb.jpg

post-9783-1208768362_thumb.jpgpost-9783-1208772495_thumb.jpgpost-9783-1208768563_thumb.jpgpost-9783-1208768687_thumb.jpgpost-9783-1208814951_thumb.jpg

post-9783-1208815107_thumb.jpgpost-9783-1208815308_thumb.jpg

post-9783-1208815469_thumb.jpgpost-9783-1208816112_thumb.jpg

post-9783-1208816635_thumb.jpgpost-9783-1208816274_thumb.jpg

post-9783-1208816413_thumb.jpgpost-9783-1208822281_thumb.jpg

post-9783-1208829175_thumb.jpgpost-9783-1208829527_thumb.jpg

post-9783-1208829736_thumb.jpgpost-9783-1208832835_thumb.jpg

The reason you haven't heard of the R33 2500R GT-X 1 is cause it doesn't technically exist. The block was stamped and the idea was in Nissan's head but it never eventuated into anything. What you see there is the owners interpretation of what MIGHT have happened. In the end, it's just an R33 GTS-t with a stamped block. So the story goes...

I still think he did a good job and having seen this car, it's very high quality and pretty damn quick! I've never seen a skyline so looked after. It's hermetically sealed for very long periods of time. The K's on it must be absolutely miniscule (I'll check at the show if you like). There's a bit of an uproar about it though as to the true story behind it. Some say the owner wasn't being very forward about what the car was. This all happened before my time though so I can't comment.

The reason you haven't heard of the R33 2500R GT-X 1 is cause it doesn't technically exist. The block was stamped and the idea was in Nissan's head but it never eventuated into anything. What you see there is the owners interpretation of what MIGHT have happened. In the end, it's just an R33 GTS-t with a stamped block. So the story goes...

I still think he did a good job and having seen this car, it's very high quality and pretty damn quick! I've never seen a skyline so looked after. It's hermetically sealed for very long periods of time. The K's on it must be absolutely miniscule (I'll check at the show if you like). There's a bit of an uproar about it though as to the true story behind it. Some say the owner wasn't being very forward about what the car was. This all happened before my time though so I can't comment.

i see.

the condition looks absolutely mint/flawless, as you say! would be great to see some normal shots of it from this upcoming show.

another model i'm wondering if ever landed in someones posession here in Aus is the 280MR 33gtst

i usually troll carsales.com to find some awesome automobiles ,would love any of these

spotted this looked pretty sweet, have a look at the extra pics of the insides on the link :D

post-31501-1259720442_thumb.jpg

http://www.carsales.com.au/all-cars/dealer...id=1252FEB7935F

love these 1s has tail lights simmilar to tessarosa

post-31501-1259720506_thumb.jpg

http://www.carsales.com.au/all-cars/privat...82&__Nne=15

these are in forza original, not sure bout the rest of em. seen one down the bay once "WTF" was said many times. didnt relize there's replicas out so i guess thats what i seen

post-31501-1259720517_thumb.jpg

http://www.carsales.com.au/all-cars/privat...82&__Nne=15

Edited by Inline 6
well while you're trolling Dan, keep an eye out for a 930 for me........prefer late 80's even though the Aussie delivered ones stopped in 86.

yeah I found one in a mag the other day pete, 45k for the full tilt model (wide body and all) out of sydney , damn cheap and looked mean

well I was gonna say the same thing Craig, but not as diplomatic as you however :down:

shoosh the pair of you :P i know i fail. stupid 3 different codings on 3 different forums

as for sand dunes, not as far as i know, no real sand u can hit except down robe way

Hey Matty the code is;

[video]http://www.youtube.com/watch?v=sK6GIO_gDYg[/video]

[video]http://www.youtube.com/watch?v=sw9HEwvbg0I[/video]

thanks dale :)

yeah I found one in a mag the other day pete, 45k for the full tilt model (wide body and all) out of sydney , damn cheap and looked mean

yeah saw those Damo

There's a red one in that lot from VIC at a smidge more than the one in Sydney Troy...great Malalla weapon.

Chopped roof would be nicer but too dear and not very Malalla friendly without a cage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...