Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

In regards to the variable intake, is it stilled hooked up and functioning? I imagine it would make a large difference with boost as well. Except IMHO you could get away with it being actuated and open fulltime by running constant 12v feed to the solenoid :banana:

tuner FAIL big time.

he was sick so it didnt go in yesterday :)

dont know when he will be back + when he is, he will have to reschedule me in which is more time loss.

booked in at another tuner tomorrow.

will be ready by the weekend.

can't wait.

dyno sheets etc up sat if all goes well.

Dan, afaik, the variable intake valve will function as normal on a NA (ill have to speak to my tuner about it first).

Nate, it still hits the front bar :)

will decide that shiet out later, will do my best to make it fit without cutting my sexy gtr bar.

the way my turbo sits, i was still able to use a bit of the stock NA intake > afm pipe which is a bonus.

i will definately get a custom pipe from the throttle body to the intercooler pipe as 1) the stock crossover one is so ugly and 2) the BOV just barely clears the power steering resevoir so i had to move it further down.

tuner FAIL big time.

he was sick so it didnt go in yesterday :)

dont know when he will be back + when he is, he will have to reschedule me in which is more time loss.

booked in at another tuner tomorrow.

will be ready by the weekend.

can't wait.

dyno sheets etc up sat if all goes well.

Dan, afaik, the variable intake valve will function as normal on a NA (ill have to speak to my tuner about it first).

Nate, it still hits the front bar :)

will decide that shiet out later, will do my best to make it fit without cutting my sexy gtr bar.

the way my turbo sits, i was still able to use a bit of the stock NA intake > afm pipe which is a bonus.

i will definately get a custom pipe from the throttle body to the intercooler pipe as 1) the stock crossover one is so ugly and 2) the BOV just barely clears the power steering resevoir so i had to move it further down.

shiiiiiiiiit.... hoped u would have been cracking in the 200's now......

soon mate... u will drive out of the tuners with the biggest grin on ur face :cheers:

Dori, check your phone, sent a few shots at different angles of the front bar/piping, hope it helps :P

With using the N/A intake pipe, is that going to work with the air box that you have? or will that need to be custom re-made? i found the JJR one to not fit so well on my N/A. I had to bend the side where it runs near the aircon cylinder (not sure of the technical name for it, it's next to the canister) and also had to unclip the canister and have it sit a bit lower. The part from the turbo to the AFM was fine though, just not sure how that's going to go with the N/A intake.

DOR134 is out and on the road, it made 201rwkw :ermm:

nate, did u get the 33 or 34 airbox cover? if its the 33, then yeah u had to mod abit to fit but for ashneels group buy, he redid the prototype so it fit R34 as well ;)

tuner said its got tgrouble holding boost up high in the revs but so far ive revved to like 5ish and it held 10-11psi fine - running straight off the gate (10psi spring) and no boost controller yet.

just found out that the braided oil line is leaking oil :@ back to pirtek i go to get it fixed up so hopefully i can get that done tomorrow morning.

love the ext gate & screamer, car feels 10x better then it did before :P

BOV is blocked atm so i got hectic doses and fluttering atm, hopefully can get a hose and plumb it all back up tomorrow coz i dont like the flutterssssss

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The real question is, on some of those wild roads they call highways, how many times did a farmer in an old ute from the early 2000s blaze past you over double lines?   Tassie is a wild and really cool place, and after doing a work related road trip there January of 24, I understand why Targa Tasmania is ran there, and is so tough to do well at! We had a brand new Camry Hybrid that handled quite nicely, and thankfully weren't in an old car, because cresting some of those hills in a 100kmh zone for it to suddenly be like "surprise f**kers, this is a recommended 30kmh hard right turn" wouldn't be pretty. We weren't racing the Camry around, but we weren't slouching in the bends either. But my lord those old farmers know their old clapped out utes, and those roads, as they were absolutely hammering it!   You're also super lucky to make it up to Mt Wellingtong this time of year. It's often road closed with snow/ice! Also, I hope you hit up Salamander Road in Hobart for some insanely good food (I highly recommend the dimly lit Irish pub for a Guiness Pie, or even the bangers and mash!!!)   How long did the Ferry take to get across? I want to do a road trip of Tas on my own time, but I get horrifically sea sick, and I don't want me on the Ferry, just the car 😛
    • So far so good, about 30km on it so far and nothing out of sorts yet thankfully
    • Look at @Kinkstaah's thread on the issue.
    • Hmm not really, I'd say its race car life or modified car life when you make 3 or 4 times the power Nissan designed the car for lol. 
    • I'll let others with more breakage chime in, but I can't think of anyone who had a problem with the standard centre plate before they had a problem with the standard gears - the plate generally just gets replaced for safety when the gearset is upgraded. As for the gearsets, its not like they are OK at 600Nm and break at 601. Their longevity is a combination of how much torque you are making and how gentle you are on shifts (or not). 
×
×
  • Create New...