Jump to content
SAU Community

Recommended Posts

Hi all,

I've read that you can fit series 5 RX7 injectors into an RB20 without too much problems, but I'm just wondering about the ins and outs of doing so. They are a high impedance injector, so it shouldn't require any ballast resistors, and they are a Top Feed, so no fuel rail mods (from what I can gather)

Has anyone done this mod and know any tricks/problems?

Link to comment
https://www.sau.com.au/forums/topic/272548-rx7-injectors-in-an-rb20/
Share on other sites

Thanks for the reply Adriano.

I was specifically wondering about the electrical side of things. What type connectors do the RB20's have (oval, square, custom)? I don't have an RB20 so I can't check.

I just want to know what is involved in fitting them, as I don't want to tell some poor sod that they'll fit straight in when there could be a lot of fiddling around involved. You do that, and it'll come back on you eventually...

  Sciclone said:
Thanks for the reply Adriano.

I was specifically wondering about the electrical side of things. What type connectors do the RB20's have (oval, square, custom)? I don't have an RB20 so I can't check.

I just want to know what is involved in fitting them, as I don't want to tell some poor sod that they'll fit straight in when there could be a lot of fiddling around involved. You do that, and it'll come back on you eventually...

Need generic injector connectors, rb20 connectors dont fit on gtr injectors unless you cut some of the notches off the injectors.

Have to wire in GTR resistor ballast, refer to the link below for my explanation.

http://www.skylinesaustralia.com/forums/Gt...mp;hl=injectors

  Rekin said:
Need generic injector connectors, rb20 connectors dont fit on gtr injectors unless you cut some of the notches off the injectors.

Have to wire in GTR resistor ballast, refer to the link below for my explanation.

http://www.skylinesaustralia.com/forums/Gt...mp;hl=injectors

I'm not worried about GTR injectors (I already have a GTR).. As the title says, its 550cc RX7 injectors into an RB20 that I'm worried about.

Steve,

rx7 550's are a direct drop in replacement for stock RB20 injectors. If there going to the trouble of putting them in i would be replacing the plugs anyway for peace of mind given there age. Other than that nothing else is required.

As for spray pattern, i never had any drama's when running mine :)

Yes they are all high impedance Hitachi injectors. Mazda changed the injector plugs to an oval style plug for the S5 rx-7. The S4 rx7 injectors should be a straight drop in.

Be aware that the NA and Turbo injectors are similar in colouring. N/A is 460cc turbo is 550cc.

N/A part number: 195500-2020 (Purple/Red top)

Turbo part number: 195500-2010 (Red top)

If you end up getting S5 550's then you can get the oval style plugs of most toyota camry's, I got a set of a V6 2001 model camry that looked almost new. Be aware but that the spray pattern is like a garden hose, and for this reason I would not recommend them. Been there done that.

Personally I would be to go for Sard's or Nismo even if it does take a little longer to save for them.

Thanks peoples. As I said, I have a GTR, so they're no good for me. I just don't want to rip someone off like I was.

Btw James, I think you have the part numbers the wrong way around. Every rx7 forum I've been on has the 2020's as the 550cc turbo injectors.

Femno's got it in one...

I was ripped off as the person who sold these to me said they were a straight swap in for a GTR.... Now I have to find some way to recoup some my losses ie. sell them, without doing the same thing to someone else.

Ideally, I'd just like to give them back to the dude that sold me them and get my money back, but that's as likely as a hole in the head. So if anyone knows of any drag/drift cops with RB20's that want bigger injectors....

  Sciclone said:
Femno's got it in one...

I was ripped off as the person who sold these to me said they were a straight swap in for a GTR.... Now I have to find some way to recoup some my losses ie. sell them, without doing the same thing to someone else.

Ideally, I'd just like to give them back to the dude that sold me them and get my money back, but that's as likely as a hole in the head. So if anyone knows of any drag/drift cops with RB20's that want bigger injectors....

Don't worry all.. they do fit my RB26 after all, albeit with some modification to the loom...

Looks like I'll have to scour the wreckers or something...

Note to self: Check part numbers etc before buying..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...