Jump to content
SAU Community

Recommended Posts

ok so i got my hands on a GTR BOV and a bigger hose for the plumb back and connected it all back up just like the stock GTT one was.

all is well but when i come on boost say around 0.5bar maybe more (highflow turbo set to 1 bar) while still in gear and and let of the accelerator the car makes the normal psssh sound but it also makes a (very hard to describe) different noise also. kinda like a viberation noise but not quite.

ill see if i can get a recording of it.

but has anyone else experienced anything different with a GTR BOV?

im not having any other problem. car is holding boost fine. idleing fine. just the noise. and the strange noise is pretty loud too if your outside or have the window down.

help.

Link to comment
https://www.sau.com.au/forums/topic/272686-gtr-bov-in-gtt-not-sounding-right/
Share on other sites

i get the same bloody noise. if i boot it, no noise. if im barely making boost no noise. its during normal accelleration that it makes it. a kinda honking vibration

when's the next meet? i'll show you if you rock up. remind me or some shiz

around 6seconds into the vid, does it sound like that? If i get it onto boost abit and then half throttle, it will do that sound. A mate thinks it sounds like a poo going down the pipes LOL

thats the sound hahahaha

thats it. like taking a bog with your ass sealed and you get that deap noise lol

any idea what it is??? if its anything bad? at first i though it was just the stiffer springs not opening enough. if i accelerate hard, change gears and accelerate again its fine. only whne slowly getting of boost it makes the noise.

hey not exactly on topic here but...along the lines i guess.

ive got a gtr blow off valve and i removed my standard r34 gtt one to replace with gtr, now when i pushed the valve up into the gtt one it is very stiff and hard but when i push the gtr one (with my fingers fron the sealed side) it feels softer...has anyone experienced this with there blow fof valve as i dont want to put the gtr one on and go for a tune with it if its stuffed ya know!

any help would be much appreciated.

hey ash,

long time no speak... i changed my gtst bov to a gtr one and also got that exact same issue! but i got rid of it..

i dont know if its the same for u, but the pipe i got to suit wasn't exactly perfect and I had a guess that the sound was of some air in the pipe as it was expanding or contracting... anyway, got a hose joiner to try to keep it more solid, and worked fine, not an issue any more!

can send u some pics if u want :ermm:

Adam

hey not exactly on topic here but...along the lines i guess.

ive got a gtr blow off valve and i removed my standard r34 gtt one to replace with gtr, now when i pushed the valve up into the gtt one it is very stiff and hard but when i push the gtr one (with my fingers fron the sealed side) it feels softer...has anyone experienced this with there blow fof valve as i dont want to put the gtr one on and go for a tune with it if its stuffed ya know!

any help would be much appreciated.

i thought that was normal? i swear there are some threads around about that and it turned out fine... my gtr bov is alot softer then my gtst one, but it does the job better so I assume its fine...

O great, another thread with somebody being worried about how their blow off valve sounds :(

oh wow thanks for your input...

vidospace the advantage with a GTR BOV is it holds more boost. only worth it if your running more boost then stock really as its a plumb back so its nice and legal.

alright, took some shots.

not the prettiest thing in the world, but she works well. definitely alleviated a lot of tension across the pipe.

im pretty sure it was a radiator hose bleeder or something, because I had to buy that gold blocking screw. was like 30 bucks all up and works fine.

post-36975-1243925653_thumb.jpg post-36975-1243925684_thumb.jpg

you can see in this pic, this is how it used to look (im pulling on the hose)

post-36975-1243925744_thumb.jpg

Adam

P.S u can leave the screw out and it gives it a lil bit more of a whistle, but im not into that sorta thing :banana:

I slapped a GTR bov on my car after I got rid of the megasonic ears bleed loud wank bov. I then got stickered to made it plumb back. It made that fats noise. Like air was blowing past the rubber pipe making in vibrate sounding like a fart. Another of my friends gets that too. Wonder why that happens. It atmo again as I got the sticker off. so meh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...