Jump to content
SAU Community

Recommended Posts

green1s.jpg

protoblues.jpg

I emailed Pete (NewKleer on here) about the possibility of running another groupbuy, only problem is he doesn't have the time to run one, but he is willing to give a groupbuy discount on the Consult LCD V2 Displays if someone is willing to run the groupbuy. I'm just trying to gauge the interest

RRP is $228 delivered for the normal green display, $233 delivered for blue display. Basically you get what you see in the pictures, and a USB A-B cable + dust plug for the USB port. Has a consult passthrough builtin (the pictured usb plug in the bottom left corner) that will let you use free Consult software with your ECU like these, Nistune and other commercial Consult software should work fine as well.

Group buy prices:

5-10 displays $200+8 express postage = $208 ($213 for blue)

11-20 displays $190+8 express postage = $198 ($203 for blue)

21-30 displays $180+8 express postage = $188 ($193 for blue)

Pickup will probably be possible from the supplier for Sydney siders, though you would have to organise a suitable day and time with NewKleer for pickup.

More info on the product:

http://ecutalk.com/consultlcd.aspx

Can find more info about the product in past groupbuys:

http://www.skylinesaustralia.com/forums/Ec...Di-t228314.html (the current V2 Display)

http://www.skylinesaustralia.com/forums/Ec...pl-t130985.html (the old V1 Display

Link to comment
https://www.sau.com.au/forums/topic/273204-eoi-ecutalk-consult-lcd-v2-displays/
Share on other sites

When/if the groupbuy will go ahead, won't be able to start until the early next month as his supplier of the LCD parts themselves are out of stock.

As for groupbuy numbers, need 4 others minimum (as I'm getting one myself) to get the $20 discount, though ideally I would want to run the groupbuy long enough to get 10 others for the $30 discount. Though would be nice to get 20+ others to get the $40 discount.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...