Jump to content
SAU Community

Recommended Posts

yep, consult cables work, the plug is located with the in cabin fuse box. i've tried a few of the free consult software interfaces and don't remember seeing anything like cold start enrichment. the one i want to get is nissan datascan, it is supposed to be a bit more in depth than the free software getting around.

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4641519
Share on other sites

As I understand it any changes you make to a stock ecu with through the consult do not stick - .i.e. once you unplug it and drive off everything returns to default mode. To make changes to settings you will need a nistune chip or for the S1 an expensive daughterboard that can be chipped.

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4641579
Share on other sites

yeah, all i can do with the software i have is, switch the auxiliary thermo fan on and off, raise and lower the idle, turn cylinders off, etc. but like kiwi said, its all real time testing that isn't a permanent change. the other major features of the software are being able to read and clear fault codes, and some of the software has data logging capabilities, good for looking at afm voltage or injector duty cycle vs rpm.

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4641708
Share on other sites

Ryan - the ECUTalk consults work brilliantly on just about any nissan (with consult ports) and I cant speak highly enough of them. There is a bucket load of other software available that works with their cables, and my personal pick is the original nissan datascan (there are a few others that are pretty good too)

As I understand it any changes you make to a stock ecu with through the consult do not stick - .i.e. once you unplug it and drive off everything returns to default mode. To make changes to settings you will need a nistune chip or for the S1 an expensive daughterboard that can be chipped.

not quite. There is a few things that can be changed with just a consult cable. For instance, the base timing, idle speed and stuff like that can be changed quite easily using just the consult cable.

Search nissan consult on ebay world wide. alot cheaper :P

NO DONT DO EEEETTTT!!

From personal experience, this is a bad idea. I went through 4 ebay specials before I bit the bullet and got the ECUTalk one. Apart from the fact that a lot of other places only use serial ports (and trying to find a usb-serial converter that will talk to them is damn near impossible) they dont all work - I had one ebayer swear black and blue that the unit I returned was not faulty, despite being back to back tested with a known one and no one could get any signal from it (tested on 2 stageas and my pulsar and 3 different laptops)

IMO just get the ECUTalk cable (with USB output) and you wont regret it. If you do want to buy a ebay special just because they are cheaper, I can send you the last ebay one I bought, and didn't bother to return, for free, and then you can have all the frustration without the expense! :down:

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4644400
Share on other sites

Ryan - the ECUTalk consults work brilliantly on just about any nissan (with consult ports) and I cant speak highly enough of them. There is a bucket load of other software available that works with their cables, and my personal pick is the original nissan datascan (there are a few others that are pretty good too)

not quite. There is a few things that can be changed with just a consult cable. For instance, the base timing, idle speed and stuff like that can be changed quite easily using just the consult cable.

NO DONT DO EEEETTTT!!

From personal experience, this is a bad idea. I went through 4 ebay specials before I bit the bullet and got the ECUTalk one. Apart from the fact that a lot of other places only use serial ports (and trying to find a usb-serial converter that will talk to them is damn near impossible) they dont all work - I had one ebayer swear black and blue that the unit I returned was not faulty, despite being back to back tested with a known one and no one could get any signal from it (tested on 2 stageas and my pulsar and 3 different laptops)

IMO just get the ECUTalk cable (with USB output) and you wont regret it. If you do want to buy a ebay special just because they are cheaper, I can send you the last ebay one I bought, and didn't bother to return, for free, and then you can have all the frustration without the expense! :down:

hmm i think that at the end of the day the "ebay specials" aren't any cheaper anyway if you need usb support. the serial-usb adapter i bought (belkin) was about $50, then the e-bay special consult port was $60ish anyway, so it cost me more that the native USB alternative from ecutalk. then theres software on top of that and the hassle of finding it for free if you're so inclined. AND you're keeping your cash in australia. convinced yet? :P

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4644664
Share on other sites

Ryan - the ECUTalk consults work brilliantly on just about any nissan (with consult ports) and I cant speak highly enough of them. There is a bucket load of other software available that works with their cables, and my personal pick is the original nissan datascan (there are a few others that are pretty good too)

not quite. There is a few things that can be changed with just a consult cable. For instance, the base timing, idle speed and stuff like that can be changed quite easily using just the consult cable.

NO DONT DO EEEETTTT!!

From personal experience, this is a bad idea. I went through 4 ebay specials before I bit the bullet and got the ECUTalk one. Apart from the fact that a lot of other places only use serial ports (and trying to find a usb-serial converter that will talk to them is damn near impossible) they dont all work - I had one ebayer swear black and blue that the unit I returned was not faulty, despite being back to back tested with a known one and no one could get any signal from it (tested on 2 stageas and my pulsar and 3 different laptops)

IMO just get the ECUTalk cable (with USB output) and you wont regret it. If you do want to buy a ebay special just because they are cheaper, I can send you the last ebay one I bought, and didn't bother to return, for free, and then you can have all the frustration without the expense! :happy:

So this one? or EcuTalk?

I is lost

http://www.plmsdevelopments.com/consult_if.shtml

http://www.ecutalk.com

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4644873
Share on other sites

I cant speak for the PLMS ones, having never actually used one, but I can say that the ECUTalk ones work brilliantly, and even though there is a few bits and pieces you have to do (usb drivers installed etc) making them a little more involved than "plug and play" the step by step instructions are stupidly easy to follow, even for a computer noob like me.

The service you get from NewKleer if you have any installation issues is second to none too IMO. Just get one man, and if you are chasing any software let me know :happy:

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4645058
Share on other sites

i'd say either one would be fine, they are both good companies with a quality cable. the only thing everyone is getting at is to get a usb one as a lot of the usb to serial convertors don't work. at the time i got mine they didn't have the usb ones so i got a Blatz brand one and use it with a belkin serial convertor with no problems at all with it.

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4645078
Share on other sites

I take it the ECUtalk V2 display is meant to be a permanently connected in car feature - does it display all of the information that would be displayed on a laptop or do you still need a laptop to gain all of the features available via the consult cable?

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4653709
Share on other sites

the display is a standalone device, intended to be permanently hooked up (but its plug and play, so u can take it out and plug it into someone elses car to check it) - if you dont want or care to use the laptop with it, you dont need to. it doesnt need a laptop connected for it to work. it can display most, but not all the info that can be shown with software (but since you can use it like a usb consult cable with a laptop if you want, if you need to know anything not shown you can use whatever software on the laptop with the display in USBIF mode).

the only time ive personally needed to hook up a laptop to it was to update the firmware (when there are new features added to the display you can get them via firmware updates), and once to have a play with active tests (changing timing/fuel temporarily)

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4653717
Share on other sites

yeah, thats why it was made, so u dont need to lug a laptop around to monitor the car. firmware updates require the display be connected to the car to get power, so youd either need to get the PC within a couple metres of the car, or borrow a laptop. of course u dont need to upgrade the firmware if it has nothing new that you want to use.

also in future if there is logging ability to sd card, you would need power to download the logs also.

if you're that way inclined, u can just buy a 12v dc adaptor and a female consult port from wreckers (or i have a spare one for $10 i can send with display) and rig that up for 12v power

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4653764
Share on other sites

That V2 display looks like a pretty good thing.

I've personally got a copy of NDS - which is very handy for diagnostics & dyno tuning (via the 'dashboard' function). It also has another tacho/speedo page with speed-alert which would be excellent if you had a carputer fitted & it was active all the time.

The V2 display would be perfect for the trip-meter function if nothing else.

PLMS have also been playing around with Consult/Nissan ECU's for many years, so they too have a very reputable product lineup.

I reckon I might get a V2 display & permanently mount it in the car.

:(

***edit***

Just bought one...

Link to comment
https://www.sau.com.au/forums/topic/273589-ecutalk/#findComment-4654237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...