Jump to content
SAU Community

Recommended Posts

hey guys,

i recently bought my r33 gts-4 and ive been working out what i need to get fixed, my mechanic mate had a good look over it and got some prices together for me. well the first problem he said was the shocks were screwed so he did some ringing around and he was being told by the manufacturers that no one makes new shocks for the gts-4, apparently the awd set up is heaps different and the only shocks u could put on it would be high performance racing ones, is this true?

he got some quotes for 2-3 thousand and i just went nuts lol considering i only paid 3 grand for the car itself lol

well thats my story guys, any advice on what to do next or anyone who might have some decent shocks lying around would be greatly appreciated.

cheers

Link to comment
https://www.sau.com.au/forums/topic/273709-i-need-new-gts-4-shocks-advice/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

hey mate, there arnt many companies that know much about a gts-4 they think the 4wd system means it has different suspension. I contacted TEIN and they said they dont make it then i found heaps of GTS-4's with it.

Photo-0130-1.jpg

This is the rear eye mounting from my GTS-4

Photo-0129-1.jpg

The rear shock is KYC brand which are reasonably priced and not racing type

Photo-0131-1.jpg

My front springs are aftermarket (dont know what ones)

Photo-0132-1.jpg

This is the front eye mounting

As long as you have those eye mounting GTS or GTS-t suspension will fit the r33

Edited by central coast person

oh awesome, cheers for that mate, so what ur sayin is that if i can change eye mounting and i could just use any skyline shocks? cause that would save me alot of trouble lol, any ideas on how i should go about this? did u do anythin to ur car?

thanks!

nar i haven't touched the any thing to make it possible. Its bolt on just like it would be for a GTS or GTS-t. Feel free to buy '2wd' suspension (some sites will label there suspension 4wd and 2wd) but you have to remember as long as you have eye mounts to your shocks it is defiantly 2wd suspension so dont worry about ordering wrong.

fork mounting = (r33) GTR

eye mounting = (r33) all other r33 models

I think you'd have better luck fitting stagea suspension or R33 GTR suspension if R32 GTS4's are anything to go by.

The rears will be the same as a GTSt, but the front will have to account for different mounting points due to drive shafts and slightly different chassis rails.

http://cgi.ebay.com.au/Nissan-Skyline-r33-...3%3A11|294%3A50

(check out the pictures i posted to see there the exact model suspension)

hey mate, i found the exact model shocks that are on my skyline. There designed for a GTS or GTS-t which means that the GTS-4 no doubtingly has 2wd suspension. Its weird when i looked at my mountings but any GTR suspension will be different mounting and not fit so buying GTS or GTS-t suspension will be what you need.

wow awesome thanks mate! cause every suspension place ive been too keeps telling that they dont sell any shocks that fit it ay lol, they keep tellin me adjustable coilovers are the only way. so ur reckon if i bought those shocks i could just bolt em on, no problems?

cheers mate.

yeah mate, i mean that's the exact model suspension i have in my skyline so what could go wrong. It bolted straight on and i see it bolting on too yours if it has the fish eye mountings.

If you call Nissan it would be worth to find if the GTS and GTS-t has the same suspension listing as a GTS-4 for reassurance but i find it hard to believe my GTS-4 can have GTS and GTS-t suspension an no other can in the world java script:add_smilie(":(","smid_38")

just remember that when i wanted to find out i didn't even get an answer from TEIN suspension, crazy GTS-4's .......

lol yeah i know ay, well thanks for all ur help, im bidding on those ebay shocks so i guess ill just have to wait and see lol. so do u have kyb shocks on the front and rear or ur car?

sure do mate. Also i went to work today and looked at the KYB range for skyline and surprise surprise it says GTS-4 r33 have rear eye mounts so all you have to do is exclude GTR's from the catalog on that section. They are all onpadible with and without HICAS aswell so they fit all r33's except GTR's :dry:

also i read that s14 suspension is the same and the part numbers were the same from KYB so you can also look into that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...