Jump to content
SAU Community

Recommended Posts

Nissan 95 R33 Skyline GTST

Engine:

Motor has only done 2500k's since full re build.

Fully balanced

Mahal Pistons

ACL race piston rings

ACL race bearings

ACL multi layer metal head gasket

RB25 oil pump

OS Giken twin plate clutch

T70 turbo

6boost style steam pipe manifold made by GARAGE7 (makes for a mean sounding RB)

263rwkw on 12psi

Cooling:

600x300x76 cooler

52mm alloy radiator

twin thermo fans

Interior:

fixed back race seat

dished drift steering wheel

in dash mounted oil pressure, water temp, and boost gauge's.

rest standard and very clean

fuel system:

walbro 550hp in tank pump

malpassi fuel pressure reg

wheels:

G-Max 18x9.5 all round

body:

needs a little work on rear quarters from big guard flaring and roof fading.

TYPE 3 body kit from viva garage (matt black)

Suspension:

Tien fully adjustable coils (7kg front and 5kg rear springs im guessing)

JIC Front camber arms

adjustable rear camber arms

could be more that i have forgot but just com and look at the car. drives awesome! NO JOY RIDERS!!!!!

will come with 3 months reg

$14,500 ono or will swap for S13 or 180sx plus cash my way. Please pm or phone 0413595838 for any more details

Only have 1 pic of the car with the new kit but ill throw some pics up from before the kit for now.

33drift.jpg

settingheight2.jpg

firstouting.jpg

resprayed05.jpg

resprayed16.jpg

Edited by SLY-L20
Link to comment
https://www.sau.com.au/forums/topic/273892-r33-gtst/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...