Jump to content
SAU Community

Kakimoto Exhausts


Recommended Posts

Im new here :)

Right now I have a GTS25 NA stock and I want to buy a Kakimoto exhaust system because of it's amazing but not excessively loud sound but which one is the best to buy

-Full mega N1

-regu 06 (i think)

and if I purchased one of these exhaust systems, how much of a power will I gain?

Thanks

Link to comment
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

kakimoto's are great. I would always recommend them for NA's but you have to remember its going to said noticeably different to a turbo skyline. The regu 06 will drone from a NA because its a cannon without the hotdogs etc etc. If you get the kakimoto R, part NO. (NS310) 70mm Pipe - 115mm Tail would be the best performance wise for a NA.

its up to you

cannon

muffler

Link to comment
Share on other sites

kakimoto's are great. I would always recommend them for NA's but you have to remember its going to said noticeably different to a turbo skyline. The regu 06 will drone from a NA because its a cannon without the hotdogs etc etc. If you get the kakimoto R, part NO. (NS310) 70mm Pipe - 115mm Tail would be the best performance wise for a NA.

its up to you

cannon

muffler

Thanks mate, any idea what kind of kw i would be gaining from the kakimoto R?

Link to comment
Share on other sites

Hannibalk1ng would be right there. Extractors would compliment the exhaust system. The main difference would be that buying a muffler would allow you to have more power through lower range (its better for street basically).

Getting that cannon catback Kakimoto make means the pipe is designed for turbo skylines so it will very droney and performance lacking on the street and even on the track you would have to reach the red line for it to feel different performance wise to a stock exhaust. Its designed for a turbo not NA, so unless its on the track at 6000-7000rpm it wont be able to be even as good as a stocker.

Thats why i would just get the muffler. Its like the stock design but functions better than it so its going to be better than it was before anyway.

Link to comment
Share on other sites

If you are going to go a 3" system they are all going to be much of a muchness in sound because they are not made for a non turbo skylines with high compression.

Link to comment
Share on other sites

i can sell you mine in about a month.. 2.5" all the way throught with a resonator and a drift muffler, also can put on a high flow cat for a little extra.

Link to comment
Share on other sites

Thanks for everything, I was just curious about the power gain but I dont need it. I just prefer the sound of the exhaust. The power is just a bonus for me.

Yeah I dont want much drone (a little is ok) so wat type of exhaust limits drone?

Edited by mick2nv
Link to comment
Share on other sites

do not get a kakimoto exhaust i have one

when people get in the car for the first time they cannot believe how loud it is, ive never had someone in my car who hasnt made a comment about the exhaust.

spend the money at a exhaust shop and get a custom one made to suit your car

you will spend less, have a better note and a power increase

Link to comment
Share on other sites

do not get a kakimoto exhaust i have one

when people get in the car for the first time they cannot believe how loud it is, ive never had someone in my car who hasnt made a comment about the exhaust.

spend the money at a exhaust shop and get a custom one made to suit your car

you will spend less, have a better note and a power increase

is it a cannon from Kakimoto or Kakimoto R??

the Kakimoto R model is quite and it can be loud when you but your foot flat but at least its not a loud drone as well......

Link to comment
Share on other sites

Best best get one made up from any exhaust place. 2.5inch all the way and a cannon. probs looking at $ 350 installed.

but expect a drone while on the freeway doing 100kms

do not get a kakimoto exhaust i have one

when people get in the car for the first time they cannot believe how loud it is, ive never had someone in my car who hasnt made a comment about the exhaust.

spend the money at a exhaust shop and get a custom one made to suit your car

you will spend less, have a better note and a power increase

Thanks I'll take your advice and get one custom made.

Soon hopefully

Link to comment
Share on other sites

im not sure the name it says n1 or somthing...

i still do not see why anyone would consider one for there NON TURBO

custom

-cheaper

-better power

-better note

-no headaches

-less police attention

Link to comment
Share on other sites

LOL, the Full Mega N1 Hyper 2000 = Excessively loud, stock R34 with it was 113dB :P

It sounded tough though, on gearchanges it would "bark" and it scared small children. Downside was that after a good drive your ears would be ringing (true story)

Link to comment
Share on other sites

yep thats what i got the full mega n1

the thing is a joke

it sounds pretty tuff tho

but yeh after a long drive ur ears are literally ringing for a few hours.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • No worries.  I have a set of Zeals to get me through for the moment but would definitely be interested in a full set of Bilsteins. Are you doing race support these days? I drove past the Bend when I picked up the 260 rs but never driven the course. How does it compare to SMSP? I'll be at SMSP tomorrow afternoon and on the 26th of June in the morning. I'll be in a very loud (straight through exhaust and straight cut gears) silver R35 GTR. Cheers, Andrew  
    • Hey all. I'm up to doing my oil and water feed lines. Has anyone done a tutorial on this on a 25det Neo? ( I know i should be asking for a tutorial on how to use the search instead, but I couldn't find anything specific) I'm running a Pulsar 3584 on a 6 boost manifold. I could use some advice on what fittings, sizes and where to run the lines. Thanks for any help.  
    • Hi, I have someone interested, if it falls through I'll let you know.  I have a brand new set of fronts that  I sourced from Bilstein UK, now revalved and complete with springs to go with the very lightly used rears, if you are interested in a full set. As Duncan has mentioned this is not my job, I sold my suspension business over 10 years ago, but I am here to help when I have the time.  To give you some idea of my schedule I was at SMSP for the State Championship for 4 days the weekend before last.  Then The Bend for 4 days last week and back at SMSP testing this week, a day visit to One Raceway, then the SMSP Day Night meeting the weekend after.  I was hoping to squeeze in a dyno day with Scott on my R32 this week, but that's not going to happen, that's the second time I have had to postpone. Apologies if my responses are slow.   Cheers Gary
    • Talking about tools, my trombone cleaner arrived, talk about weird speciality tools....
    • Ha ha ha, I read that he had it based on brownie points so knew it wasn't going to be sold   I also am only shit stirring on buying, while they'd all be great cars, I don't need more, I actually sold one a few weeks ago. And immediately bought more tools...
×
×
  • Create New...