Jump to content
SAU Community

Recommended Posts

Was informed by Main North Nissan today that they have three owners with the clicking problem at the moment and are narrowing down the cause on a test mule. So they told me to hold off bringing in mine till they sort it out. I told them about the info available on the US forums regarding missing top anti rattle springs and loose tie rod ends and it appeared to be news to them! We'll see if they can come up with a permanent fix soon.

Theres a few different things the clicking noise can be. There is the pins through the calipers have a small piece on them which can rattle over bumps, and also puting a slight bit of grease on the wheel to hub matting face seems to fix a few of them when its not the pins. Alot of them its from the drivetrain, and is normal operating noise.

  • 1 month later...

Went to book my car in to Main North Nissan to fix my rattle/creaking front wheels only to be informed by the Asst Service manager that they have NO fix for the problem and theres nothing I can do except drive around with an embarrassing noise coming from my wheels on even mild turning now. I asked him if Nissan is happy with the situation that their premier model sounds like a 20 year old clunker and even causes heads to turn for all the wrong reasons when maneuvering around a shopping centre car park. He didn't seemed to perturbed by that idea. So what should I do now? Kick up a big stink with Nissan HQ and argue that if a camry made that noise they would definitely fix it and that I find it amazing that Nissan cant find a fix for something that clearly does not afflict every GT-R out there? Do you think its concern that if it is brake related that they are up for the whole shebang 4x rotors and pads if thats what it takes to fix it? Id at least have a go at the anti rattle clip solution, i mean what have they got to lose?

Thoughts please?

just had moorooka nissan fix this for me last week during the POS.

perhaps your guys can call moorooka?

they cleaned down the interface between the rotor and hub and applied grease.

not there anymore.

I am not sure how long this fix lasts as some people have this recur.

Last time i had this clicking noise, i tightended the tie rod ends and it went away. However, i need to report back and say it came back a few days later. I had a track day a couple of weeks later (swapped track wheels and road tyres a couple of times) and the noise has been absent since. I've never done any deliberate cleaning of hubs etc. I'm really starting to wonder if anyone knows what this problem actually is. Could it be something simpler, like the hub making this noise if the wheel nuts aren't torqued properly? Maybe just try torqueing the wheel nuts to try? I know it sounds silly but i would give it a try if you can be stuffed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...