Jump to content
SAU Community

Recommended Posts

Its not really attached by anything. Like I said it's just a rubber-like tube around the metal handbrake itself. I suppose when they first put it on it was greased or something to make it slide on, but I found it very difficult to get it off without cutting it. Someone else might have a better idea.

I replaced mine with an aftermarket one anyway, so I wasn't bothered.

how the hell did you do that? ive butchered both my handbrakes (spare and one on car) trying to do this

please reveal the secret... :P

i had the same problem, mine was tattered and looked like shit. i had a spare handbrake and just took the handbrake assembly apart and mounted the spare (better) one on the only mechanism.

ok what you have to do, is take the leather boot off

then get a thin flat head screw driver under neither the handle from behind and pry it open a bit

then get a can of WD-40 with one of those long thin nossle things and get as much under the handle as you can

then twist and it will eventually work the lubricant under and it will slide off

also what i found helpful is getting a rag and some multigrips to get a good grip on it to twist

good luck :D

Ive done it & f*** it wasnt easy lol.

I used a flat head screw driver and stabbed it in all round as deep as i could from both ends of the handle. After an hour of doing so i was able to start twisting it off.

have FUN!

haha yeah i gotta momo one sitting around, glad to find this post, ive been struggling with it for the past couple of weeks.

the button sizes are different on the momo handle i got though thats why i didnt cut it off, i was kinda scared the momo wouldnt fit on and i would need to replace the old one ..

gonna try lubing it up soon then cheers

these momo grips etc you guys have...

do they replace the button aswell? basically got this shithouse drift button thing that always falls out and wont always engage without f**king around with it. really annoying.

but i have no spare original button and i think the rod which the button screws onto looks rooted (ie thread is wrecked)

any links to what they are? where i can get one from?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...