Jump to content
SAU Community

Recommended Posts

yeah, as long as cops cant see the light too brightly at night it should be OK!! just turn em off when you get pulled over, then they got no proof, cause you can have them installed just not on when driving!!!

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-577420
Share on other sites

I have them in my footwells and under the seats, looks awesome when the doors open, but couldnt tell if you were to drive past me on the street, just have a switch close by in the event of being pulled over and your set, no probs.

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-578888
Share on other sites

when i got pulled over i got let off for the neons in the footwells because they said as long as the neon is below the height of the steering wheel and the neon was not directly visible it will be fine, but i guess that can change from cop to cop...

cheers...ben.

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-581272
Share on other sites

Just thought I'd pop this up regarding the legality of non-essential lights in Victoria as it has been clarified to my workplace by the Police.

Following is an excerpt of a Road Safety statement as it applies to neon lights and such. Still trying to find an online link to the document but have had no luck as yet... (will keep looking!)

  Quote

Road Safety

Non-Essential Lights

The boom of non-essential lights, including fluorescent lights under vehicles and the smaller ones on bonnets or wiper blades (generally blue in colour), on motor vehicles is continuing, creating confusion about their legality.

A little history about non-essential lights: the Road Safety (Vehicles) Regulations 1988, required motor vehicles and trailers to comply with the Standards for Registration (Victorian Government Gazette S15, 1 March 1988). Clause 702 of these Standards prohibited the fitment of lamps or reflectors that weren't required or permitted. The Regulations were repealed in 1999, as to were the standards, and replaced by the current Road Safety (Vehicles) Regulations 1999, incorporating the Standard for Registration at Schedule 8.

In making the new Regulations and Standards, Victoria adopted the National Light and Heavy Vehicle Standards. The current Standards for Registration, unlike the old, does not prohibit the fitment of lamps that are not prescribed.

What they do require, is for vehicles to be fitted with the lamps specified in the Standards and the Australian Design Rules. In addition, cluase 118(2) of the Standards allows a vehicle to be fitted with any other lamp or reflector, providing it does not show red light to the front, a white light to the rear or a light that flashes.

With regards to dazzling lights, clause 75 of the Standards stipulates a light (except a high-beam headlight), fitted to a vehicle must be built and adjusted to provide the necessary amount of light, without dazzling the driver of another vehicle approaching, or being approached by, the vehicle.

Additionally, if any light fitted to a vehicle (whether it complies or not) is used to dazzle, or in a way likely to dazzle another road user, then the driver may be charged accordingly (Road Rules-Victoria rule 219 applies).

The Macquarie Dictionary defines dazzle as 1. To overpower or dim (the vision) by intense light. 6. Temporary loss of vision, or temporary reduction of visual activity, related to the presence of a bright (possibly moving) source of light.

VicRoads' guideline (Vehicle Standards Information Sheet 8) permits the fitting of additional forward and rearward facing lamps, which comply with or are permitted by the Standards. Mandatory light fitted to a vehicle must continue to comply with the relevant Standards.

If a vehicle is fitted with lights in accordance with the Standards and used in accordance with the Road Rules-Victoria, then police can take no action. If a light fitted to a vehicle does not comply with the Standards, then a defect notice may be issued and the driver charged accordingly. As to the use of flourescent lights under vehicles and the blue lights fitted to vehicle bonnets or wiper blades, providing they do not dazzle other road users, they are quite lawful.

[End Quote]

So essentially in Victoria, as long as no additional light shows no red light to the front (making other drivers think you have your brakes on), white light to the back (making other drivers think you are in reverse), flashes or dazzles, you're clear.

This went through the courts here not long ago, where someone got charged for having windscreen washer LEDs. He won his case in court, and all fines issued to people for having these LEDs installed had to be reversed.

Hope this clarifies things a bit!!!

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-583781
Share on other sites

Wouldn't say they'd call neons a dazzling light.... Basically they mean any light that "blinds" you (high beams, spot lights, etc.) is a dazzling light. Neons are fine. (In Vic. anyway.)

I have questioned it myself I must admit, IMHO I think that the high-brightness LEDs on windscreen washers are dazzling, I also think the rear red fog lights on Excels are dazzling and they should all be recalled and defected! But they're not...

We have been trying to get info on legislation for the various states, it hasn't been easy. I spent an hour trying to find the document I quoted from on the web, to no avail. Ended up typing it all.

From the layout of the document it came from the vicpolice.vic.gov.au site. We have been looking for a statement like this for a while, and finally received this last month. Haven't seen anything from any other states though.....

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-584135
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...