Jump to content
SAU Community

Recommended Posts

Hey Yall

Bloody white car slamed their door into my rear left door today leaving a 15 cm high dint in my door and a line of paint from their car on my door...

Paint came straight off no worries, but has left a crease mark and has really annoyed me...

Im so pissed right now, must have been very intentional to do so much damage... Bastards...

(Need less to say no note left behind)

Im looking for someone who can hep me out with like a paint less dint removal???

Ive done it before with some of my older cars, but never with this one... I got charged an arm and a leg last time I did it so I dont want to go back to them...

Does anyone here do it, can you adivse on a good place to get it done cheap???

Brand new car, with a bloody dint... Arhhhhhh

Link to comment
https://www.sau.com.au/forums/topic/275172-anyone-work-at-a-bodyshop/
Share on other sites

is this on the SS?

yeah

15cm. must have been intentional to leave a crease that big.

yeah, its not a deep dint due to it being right near the edge of the door (stongest part of the door) but it sucks...

will be easy to fix, for a professional I mean... Id never try my hand at body works...

such a shame.. the first ding on a new car always shits you..

there is a group called "touchup guys"... I thought they were a fag company driving around in a van to touch up men, but it turns out they do dent removals.. so I didn't bother calling them... :D

might help you though..

I've seen their van around my area..

Yeah I copped a good dent from an old fag in a Tarago, nice and high up on my door, the prick was taking ages to park and even had his wife move a trolley so it didn't touch his "lovely" car, I had literally turned my back for 5 mins...massive white gouge and he'd fled the scene.

there is a few guys on the coast and you might find someone in brisbane under similar names.i used a guy from a mob called dent force here in marrochy, had 3 decent dings to get out but he got them.I think it was $60 a panel from memory.Or there is dent doctor too.

I just booked in for monday with http://www.undintit.com.au/

Will let you know how I go, but looking at website they do fixed price removal of $110 per panel onsite...

Im goona go with the "at thier workshop" option as its a 20% saving and close to the office... So tad over $80 per panel...

Everyone I called was $100+ per panel and even more for onsite repair, or over $70 per dent...

I called and said, I have two dents almost the same on both rear doors, he said oh we will take care of you to keep it under $200...

So thats 4 dints repaired for under $200 (hopefully)...

And they are gonna look at a little mark in the rear right wheel arche which I only just found today after going over the car with a fine tooth combe...

So yeah, ill let you know...

I just booked in for monday with http://www.undintit.com.au/

Will let you know how I go, but looking at website they do fixed price removal of $110 per panel onsite...

Im goona go with the "at thier workshop" option as its a 20% saving and close to the office... So tad over $80 per panel...

Everyone I called was $100+ per panel and even more for onsite repair, or over $70 per dent...

I called and said, I have two dents almost the same on both rear doors, he said oh we will take care of you to keep it under $200...

So thats 4 dints repaired for under $200 (hopefully)...

And they are gonna look at a little mark in the rear right wheel arche which I only just found today after going over the car with a fine tooth combe...

So yeah, ill let you know...

sounds like your onto it.

I just booked in for monday with http://www.undintit.com.au/

Will let you know how I go, but looking at website they do fixed price removal of $110 per panel onsite...

Im goona go with the "at thier workshop" option as its a 20% saving and close to the office... So tad over $80 per panel...

Everyone I called was $100+ per panel and even more for onsite repair, or over $70 per dent...

I called and said, I have two dents almost the same on both rear doors, he said oh we will take care of you to keep it under $200...

So thats 4 dints repaired for under $200 (hopefully)...

And they are gonna look at a little mark in the rear right wheel arche which I only just found today after going over the car with a fine tooth combe...

So yeah, ill let you know...

ooh yeah let me know how it goes, my doors make me sad each time I look at them :P

and ROFL @ dent doctor...one of their guys "04DOC" gave it a squirt past me on the M1 yesterday, straight past a speed camera **fLaSh** he was too busy looking over my way and being a tool to see the massive 4WD almost protruding into the inside lane with "POLICE" written on it.

LOL

Yep, so due to the weather this morning I was unable to take any before photos...

And after photos are pointless....

CAUSE ITS LOOKS ALL BRAND NEW... :P

Worked out to be $220 total...

So im pretty happy with that, they were not the cheapest but they do have a really good rap...

+1 from me too...

Yep, so due to the weather this morning I was unable to take any before photos...

And after photos are pointless....

CAUSE ITS LOOKS ALL BRAND NEW... :down:

Worked out to be $220 total...

So im pretty happy with that, they were not the cheapest but they do have a really good rap...

+1 from me too...

Im calling them :P I have one dent in my merc, its like pen sized i hope they can get it out :D

Up their bumbs i dont like them. They want $110 to remove a dent smaller then a 5c coin, but its $110 if you have 50 dents in that panel. They charge per panel. They can suck my balllzzzzzzz

My mate Jason who works for Dent Magic i cannot recommend highly enough.

His prices are better too.

Ph: 0411674089

Tell him i sent you too

Thanks turbo_bitch lol I will give them a ring when I get some spare time.

so how was it?

my car has a dent too but i don't really want to pay 80 for removing a dent

or is 80 consider cheap?

Oh I haven't called yet I'm retardedly busy and planning a road trip so I'll give a ring when I come back, but $80 is about standard its gonna very be $10-$20 every else you call. I don't know why they charge so much for something that takes them less then 10 minutes to complete.

Oh I haven't called yet I'm retardedly busy and planning a road trip so I'll give a ring when I come back, but $80 is about standard its gonna very be $10-$20 every else you call. I don't know why they charge so much for something that takes them less then 10 minutes to complete.

Don't wanna be rude to you Alex but they charge $80 for a reason, thats because they are professional at there field of work. Everyone can pop a dent out from a panel but do u have the right tools? If you have a stuff up who will fix it?

I work in the design industry where people easily pay me up to $150 an hour for my designs, my tools is my brain which everyone has so why do they pay me to do the design instead they can use there own for free? Thats because I can come up with things that you can't.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...