Jump to content
SAU Community

Recommended Posts

hey people i need some help!

i am about to turbo my 1989 R31 skyline and i am worried about my diff snaping!

are the axels strong in the diffs?

are the centers strong??

if i get a spool for it will i need to buy a shit load of axels???

WHAT HAS EVERYONE ELSE GOT IN THEIR R31s??

I WANT TO BE ABLE TO DRIFT IT WITHOUT WORRYIN ABOUT THE DIFF ALL THE TIME

any help would be great!

thanx

Do you need to drive it on the street regulary?

If not just get a VL V8 diff or a VL turbo diff just make sure that it is a 28 spline one and get a mini spool from ebay. if you break that you are doing well.

BTW i have a VL V8 diff here in Newcastle if ya need one PM me.

Yeah bud as old mate above said mini spool or lokka www.4wdsystems.com.au I give mine hell and she is sweet. tyres also have a bearing on axle snappage, its grip not slip that breaks shit :P

R31 skylines have a 4 pinion 28 spline from factory. Diff will be fine. I've only ever heard of a few axles shearing off, nothing to be concerned about. Having a spool will not be that nice to the axles in the long run but then again you will be drifting :P

thanx for the heads up guys!

i had the rb30et that im goin to put in my R31 in another car (VK not a VL) and had a 9inch behind it so i had no dramas, then i sold the 9inch to a mate and i put his V8 diff in and i blew it up in 3 days! thats why i was so worried!

i no im guna break stuff coz i will be driftin it, i just dont want it to be a weekly diff swap!

so the vl diff fits the skyline? i didnt no that!

anyother ideas ??? keep em comin

THANK YOU FOR YOUR HELP!

PS: this is going to be my regod Daily drifter, so dont want to make it undrivable

Edited by excon

R31 pintaras have weak diffs/driveshafts, R31 skylines are strong as.

I daily drove an R31 with a minispool in it for 3 years, busted the tailshaft in it from a hard launch but the driveshafts took all sorts of punishment and were still perfect.

  • 1 month later...

not sure if this is still active but here's my 2c

vl diff's do not fit unless u modify the mounts, but there is no point in that as others have previously said r31 diffs hold up just fine. i have had my 31 spooled for more than 4yrs and never broken an axle now its turbs and still holds up fine with constant thrashing

and to break a 28 spline axle it either cause it was already stuffed or you actually have the power to break em

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...