Jump to content
SAU Community

Recommended Posts

I am a beginner when it comes to full on drifting, i mean i can power skid a corner but no handbrakes, clutch kicks and all that. Owning awd cars for the past 2 years doesn't help either, but i am looking at giving it a go. I know i am going to be shocking for a while, but i have become extremely interested in the last month or two.

I have just bought my first s13 with the almighty ca18 and i'm looking to get that out there in the next few weeks to see how i go.

I have never been out to a track except to watch and i need to know any information that will help me. What I need to take? What i should do the first time out? Should i go for a drive with some people to learn the basics? What sort of costs are involved with licences and general track days? Any information will help out alot..

cheers

joshy :wheelchair:

Link to comment
https://www.sau.com.au/forums/topic/276279-help-out-a-noob/
Share on other sites

didnt you post this in the motorsport section too? anyways listen to what they say. basically works out to be like this.

go to drfit school days as well

fit suspension mods to help handling, skid till ca18 pops, throw it in the bin, fit sr20DET with mild mods to support drifting.

then ask again. go to drfit school days as well

dont forget to cup some workshops inorder to get hektik drift tyres and free workdone!

Link to comment
https://www.sau.com.au/forums/topic/276279-help-out-a-noob/#findComment-4677991
Share on other sites

Jump on www.secretdrift.com.au , and read read read ............ don't post up this in there as you will just get burnt , there are 1000 threads about exactley all the info you need , posting up ANOTHER noob thread will just people off. See you in there and welcome to the world of broke !

P.S my user name is jangles on SD if you have any other Questions ??

Link to comment
https://www.sau.com.au/forums/topic/276279-help-out-a-noob/#findComment-4678069
Share on other sites

grab a couple of sets of second hand tires go out to a friday night practice at QR and go hard

you will need full length clothing enclosed shoes helmet, assorted tools, jack wheelbrace, skid rims and your set

im sure there will be more than enough people willing to go out with you and give you a few pointers

and i know im a chick but i do know a bit so if you ever see me out dont be scared to come say hi =]

Link to comment
https://www.sau.com.au/forums/topic/276279-help-out-a-noob/#findComment-4679018
Share on other sites

  • 2 weeks later...
grab a couple of sets of second hand tires go out to a friday night practice at QR and go hard

you will need full length clothing enclosed shoes helmet, assorted tools, jack wheelbrace, skid rims and your set

im sure there will be more than enough people willing to go out with you and give you a few pointers

and i know im a chick but i do know a bit so if you ever see me out dont be scared to come say hi =]

what tyres to use? some cheap and nasties ?

Link to comment
https://www.sau.com.au/forums/topic/276279-help-out-a-noob/#findComment-4701227
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...