Jump to content
SAU Community

Recommended Posts

:D - - On Sunday the 21st Of June 2009 My mates Nissan Skyline R32 GTS-T 93 model was stolen from the Croydon Area, It was taken from Dorset Rd In between Eastfeild Road and Mt Dandenong in between the hours of 8.00 Pm and 12.00 Midnight. The car had no number plates on it due to it had no registration, The colour of it is - - CANDY MARONE - - It had 5 spoke 19inch rims, although unsure of the make, It had a Front mount coller, Loud Exhaust, it had a Body kit unsure of make, I will put pictures up of the car. It had a Sound system in it, DVD PLAYER with Screen, 2 small screens also in the back, Had 2 Polk Subs 12inch, It also had a Boost Gauge on the Pilla, it had under dash neons also. Due to a possible Coil Pack problem the car was not running perfect, At high revs it would seem not to spark right causing the car to Make loud Popping sounds from the exhaust. The car was straight with no major flaws, It had a scrath on the left side rear quater. I'm not sure what else to mention but if I think of anything I will let you all no.

If anyone knows or hears of anything contact me via a Private message and we will take it from there, Any information regarding this theft will be greatly appreciated and a cash reward will be on offer, Thank you to anyone who is willing to keep their ears to the ground and eyes open,

Most Kind Regards,

Michael.

post-15911-1246122273_thumb.jpg

post-15911-1246122287_thumb.jpg

post-15911-1246122296_thumb.jpg

post-15911-1246122309_thumb.jpg

post-15911-1246122317_thumb.jpg

Edited by SIKLNE
Link to comment
https://www.sau.com.au/forums/topic/276746-stolen-nissan-r32-skyline/
Share on other sites

might be better leaving a phone number there. so you can get direct contact.

had alot of people report there cars on here with there phone number, and one has not complained about prank calls, if thats what your worried about.

I feel sorry for him, but that car's been parked in the same spot on Dorset Road for as long as I can remember. It was inevitable.

Yeah I do agree, it was not a good spot to be parked, but it would not go up the drive way unless the front bar was removed, but yeah with people around that are willing to pretty much do anything, being parked on Dorset Rd was not a good idea, But f**k people who steal cars are truly messed up, it's so low, I cant stand them. :) :) :down:

Yeah I do agree, it was not a good spot to be parked, but it would not go up the drive way unless the front bar was removed, but yeah with people around that are willing to pretty much do anything, being parked on Dorset Rd was not a good idea, But f**k people who steal cars are truly messed up, it's so low, I cant stand them. :) :) :down:

i have found most bunnings to have a big bin full of pre cut off cuts, all the size of single bed planks that go under the mattress for f**k all, i grabbed a heap of them to smooth out my parents drive way when i stored my 32 there before i got an alarm... those bins are normally near the timber yard.

notting hill definatly has one of these, and i have seen one at another store, but cant remember which one!

HAVE TO THANK EVERYONE WHO READS THESE THREADS AND IS KEEPING AN EAR AND EYE OUT !!! :)

IM MORE THAN TRULEY GREATFULL !! I CANT ELABORATE HOW MUCH THIS HAS RIPPED ME APART !!

BUT I CANT EVEN PUT INTO WORDS HOW MUCH THIS MEANS TO ME ALL YOU PASSIONATE SKYLINE LOVERS...THEY WAY YOU ALL HAVE EACHOTHERS BACKS... ITS TRULEY AMAZING... :down:

THANKS AGAIN.... AND DID I SAY THANKS AGAIN ? :)

XOXOXOXOXO !!

HAVE TO THANK EVERYONE WHO READS THESE THREADS AND IS KEEPING AN EAR AND EYE OUT !!! :D

IM MORE THAN TRULEY GREATFULL !! I CANT ELABORATE HOW MUCH THIS HAS RIPPED ME APART !!

BUT I CANT EVEN PUT INTO WORDS HOW MUCH THIS MEANS TO ME ALL YOU PASSIONATE SKYLINE LOVERS...THEY WAY YOU ALL HAVE EACHOTHERS BACKS... ITS TRULEY AMAZING... :D

THANKS AGAIN.... AND DID I SAY THANKS AGAIN ? :P

XOXOXOXOXO !!

Will definitely keep an eye out for you, I live and work in the area. Maybe put your number up so people can call you immediately if they see it?

Will definitely keep an eye out for you, I live and work in the area. Maybe put your number up so people can call you immediately if they see it?

Good Idea Andy, I think you should put your Mobile number up, You never no your luck, someone may see something bud :P

Ah that sucks. I'll keep an eye out.

This is just around the corner from me. Had a GTR badge on it that was taken recently... The guy parked it in the street on Dorset Road... to be honest, it was only a matter of time before someone stole it.

NOOOOOOOOOOO U GOTTA BE KIDDING ME RIGHT??

Andyr32 - no way man, f*k dude can't bleive this has happened after all the plans we were talking bout for your car.

I'll definitely keep an eye out, and will advise my mates that live in the area to do the same.

That sucks dude, hope you're alright ey

Good luck and i hope that someone sees it and gets it back to you in one piece

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...