Jump to content
SAU Community

Recommended Posts

Hi, I'm new here and I've heard about some intresting engine swaps and engine combinations come out of Austrailia, like the RB30 with the 26 head, etc. I told my friends and they dared me to ask you guys to show us the craziest engine swaps Yanks have never seen! Show me V8s in S13s or any other work-inteisive but ultimately bizzare engine swaps!

There is one in this thread

S13 Conversion

Where the guy has put an RB25DET into his S13, added a second turbo (making it a DETT) and then replacing the turbos with HKS 2530s. Said to make about 400rwkw. I think that classifies as a crazy S13 swap.

:(

Originally posted by neil_se

13b turbo, 2jz, 1jz, vg30det, rb26dett, rb25dett have all been done in australia. putting a v8 in would be sacrilege.

Even a twin turbo Nissan 4.5L quad cam V8? :)

Originally posted by neil_se

13b turbo, 2jz, 1jz, vg30det, rb26dett, rb25dett have all been done in australia. putting a v8 in would be sacrilege.

Links/Pics please!:)

the last 3 of those conversion have all been performed by TTracing in brisbane. the rb25dett is (as far as is known) australia's fastest silvia, the vg30 is owned by the owner of TTracing but was only completed the night before jamboree so i'm still waiting to hear about it's power and times. his son owns an rb26dett silvia but i haven't heard much about that.

the 13b turbo silvia is also in queensland and is almost finished i think. i have heard of the 1jz and 2jz being done but i haven't seen them and can't exactly remember where.

rb25dett silvia

S2400116.JPG

vg30det silvia

S2400115.JPG

my mate, is using my old engine, making it around 200kw's at the crank (not much, but its remaining NA) before nos, and its going in his s13, its gonna be using 100hp+ nos setup.

Originally posted by dangerous_daveo

Even a twin turbo Nissan 4.5L quad cam V8? :)

Already been done... it's in Newcastle/Hunter in a shed (Maitland) except it's a nutso NA one with 8-throttle induction and mega-spec cams. Hooked up to Skyline 5spd 'box and GT-R diff that's been cut-n-shut to fit.

Yet to run more than a few hundred meters as it has problems with gearbox vibration they can't sort out once the car gets over 40km/h

There's also a Supra in Tas with a JGTC-spec 3UZ-FE in NA-trim.

Very cool...:D

Originally posted by Sonic

There's also a Supra in Tas with a JGTC-spec 3UZ-FE in NA-trim.

Very cool...:P

Theres a what down here? Can't say I've heard of that beast.

And whats a 3UZFE? I thought there was only the 1UZFE 4.0l and the 4.7l 2UZFE in the Cruisers?

I'll believe it when I see it!

cheers,

floody

The 3UZFE is out of the Japanese Celsior... and I think its the Lexus SC430 in Oz?

Bugger the 3UZFE, someone should put the 1GZFE V12 out of the Toyota Century into a Trueno or an Altezza, cut n` shut, I know but... can you imagine?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...