Jump to content
SAU Community

Turbo Dose/flutter?

syfon

By syfon,
in Western Australia

 Share

Recommended Posts

syfon Veteran

syfon

Posted
Posted

Hey guys,

last night on the cruise a black r32 was next to me and kept 'dosing' his turbo, making the tu tu tu noise.

It sounds like turbo flutter but the sound is much much louder and slower sounding.

I read somewhere on the net that to get this noise u need to have a straight pipe coming off the front of the turbo and either block off your BOV or completely remove it.

Does anyone know how to achieve this sound from your turbo? I am aware that some people think or bad for the turbo etc, but i am not worrying about that at the moment.

If anyone could advise me how this sound is achieved it would be awsome :laugh:

Link to comment
https://www.sau.com.au/forums/topic/278235-turbo-doseflutter/
Share on other sites
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

dose_it Enthusiast

dose_it

Posted
Posted
Hey guys,

last night on the cruise a black r32 was next to me and kept 'dosing' his turbo, making the tu tu tu noise.

It sounds like turbo flutter but the sound is much much louder and slower sounding.

I read somewhere on the net that to get this noise u need to have a straight pipe coming off the front of the turbo and either block off your BOV or completely remove it.

Does anyone know how to achieve this sound from your turbo? I am aware that some people think or bad for the turbo etc, but i am not worrying about that at the moment.

If anyone could advise me how this sound is achieved it would be awsome :laugh:

Yep thats right just disconnect your

Blow off valve.. It may leak a little tho depending on type.. And just have a different intake pipe.. Theres a full how to on the calais turbo site for the vls.. Gotta love that sound..

syfon Veteran

syfon

Posted
  • Author
Posted

I've got the stock BOV on my car, and i have replaced the standard gasket with a "solid" tin gasket so when the BOV goes off it cant vent to intake, therfore forcing the air back thru the turbo. But how do i get it real loud like that r32 last night?

R33Matt Collaborator

R33Matt

Posted
Posted

If you want a cheap and easy way of getting flutter you could use a Coke Can, lol. I did this with my car and it works perfect.

You just cut the Can open, take the BOV off, cut the Can to the same shape as the BOV, drill 2 holes in the Can for the BOV bolts, put the piece of Can in between where your BOV bolts onto the pipe and done. :laugh:

The BOV is still on there and all the hoses are still hooked up but the BOV is blocked off. The Aluminium is heaps strong enough to block it off.

Oh and you will also need a Pod Filter

Have fun! :laugh:

Samon Proficient

Samon

Posted
Posted
If you want a cheap and easy way of getting flutter you could use a Coke Can, lol. I did this with my car and it works perfect.

You just cut the Can open, take the BOV off, cut the Can to the same shape as the BOV, drill 2 holes in the Can for the BOV bolts, put the piece of Can in between where your BOV bolts onto the pipe and done. :laugh:

The BOV is still on there and all the hoses are still hooked up but the BOV is blocked off. The Aluminium is heaps strong enough to block it off.

Oh and you will also need a Pod Filter

Have fun! :laugh:

Even easier way? You take off the little piece of rubber hose that goes from the outlet of the BOV to the solid pipe which goes to the intake, shove a coke-bottle lid down about halfway, and put the hose back on as it was. The air can't get out because of the bottle lid and it still looks stock!

shaunvlc Enthusiast

shaunvlc

Posted
Posted

or you could do it the proper way which is easiest if you have a fmic. Relocate the afm to the I/C piping, probably just before the cross over pipe would work best and then that gives you more room and can make any sort of intake you would like as it only needs the pod on the end.

I would be using a piece of 3" pipe with the pod on the end that way the pod will go straight onto the end of the pipe and all you will need is a 3" to 2 1/2" reducer (silicon hose) to attach the pipe to the front of the turbo. 2 1/2" pipe gives you that real high pitched annoying flutter/dose. 3" would be more mellow and less high pitched.

Of course the bov has to be blocked/removed. It's a lot of stuffing around for a sound that isn't that great and get's very annoying. But, each to their own. good luck with it.

shaunvlc Enthusiast

shaunvlc

Posted
Posted

also one other thing. Im not sure what you would need to do with the breather hose that is attached to the stock intake. I'm not sure where you would re locate that, the plumb back pipe is obviously out of the equation now as you wont be using your BOV.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • dbm7
      Stagea Front CV Axle Question

      By dbm7 · Posted

      Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...