Jump to content
SAU Community

Recommended Posts

Hey,

I'm currently parting out a R34 Skyline Sedan.

Here's some of the parts currently up for grabs. Please DO NOT ask me to ship any large parts as it'll cost an arm and leg to ship from NZ - AU. :blush:

PM me if your after any other parts

NOTE: All prices are in AU dollars

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

B) Air con unit (damaged face plate but still working fine) $60

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

G) Door sill trims $80

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

N) Rear wiper + motor + loom $100

O) Tail lights (tinted lenses) $160

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Q) Glove box $80

A) airbags.th.jpg B) airconunit.th.jpg C) apillartrimboostgauge.th.jpg D) airconvent.th.jpg

E) centreconsole.th.jpg F) seatbelts.th.jpg G) doorsillcovers.th.jpg H) clustersurround.th.jpg

I) tiptronicshiftersurroun.th.jpg J) cluster.th.jpg K) 48396374.th.jpg p1000506.th.jpg

L) 83223873.th.jpg M) winddeflectors.th.jpg N) rearwiper.th.jpg O) 70568454.th.jpg

P) jblsoundsystem.th.jpg Q) 42715815.th.jpg

Edited by Chang

Alright here's what has been sold thus far:

- R34 Headlights SOLD

- R34 Left window switch SOLD

- RB25de Neo ECU SOLD

- All exterior badges SOLD

Everything is still up for grabs :P

Edited by Chang

Hi mate, can I just take the arm-rest and handbrake leather cover separately? Do they fit on 2 doors GTT? If u do post, plz PM me the price including post to SA 5072. Need them asap! Cheers! :(

hay buddy

how much for just the ash tray (no surround just the ash tray)

and the a/c control plastic cover (just the cover please mine cracked when i took it apart for paint dont need the buttons and actual unit from behind it)

sent to 3032 melbourne

cheers

julz

Rear wiper + motor + loom SOLD

Tail lights (tinted lenses) Payment Pending

Still heaps of parts available. Just ask :down:

Edited by Chang

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

O) Tail lights (tinted lenses) $160

Q) Glove box $80

B) Air con unit (damaged face plate but still working fine) $60

G) Door sill trims $80

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

N) Rear wiper + motor + loom $100

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Stereo surround + brackets

RB25de Neo ECU

All exterior badges

Car will be sold this weekend. So any other parts that are not listed here, it'll be your last chance to ask. :merli:

Edited by Chang
  • 3 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...