Jump to content
SAU Community

Recommended Posts

hey guys just need some hinter's or somethin, ive noticed till just recently in the last few days that the car has eaten almost half a tank and ive only gotten 150k's out of her rather then the usual 200 odd k's any idea's? and yes ive tried to drive as economic as i can but even when ive put my foot down, i still use to get good mileage out of the tank so im just woundering what it could be it is due for a service soon so im just hoping that its just that and only that. that the oil is dirty or something.

first check for any fuel leaks as above as thats cost free

how does the car idle? if its idling like shit you might have a leaking injector o-ring spitting too much fuel in (pretty unlikely if no one has played around with them)

if that fails, replace oxygen sensor

Edited by snozzle

Have you got any aftermarket stuff on your car??

If so, the stock ecu might be having a bit of a hissyfit and could rich & retarding the tune/engine. In which case, you'll be constantly running rich, even when driving midly and hence you'll be using lots of fuel. Alternatively, your O2 sensor might have gone bad and might be malfuctioning. Considering Skylines now are 10+ years old, id could be a factor worth considering. As mentioned above, best taking first for a service with a diagnostics and tune. That way, you've got all bases covered. :teehee:

Have you got any aftermarket stuff on your car??

If so, the stock ecu might be having a bit of a hissyfit and could rich & retarding the tune/engine. In which case, you'll be constantly running rich, even when driving midly and hence you'll be using lots of fuel. Alternatively, your O2 sensor might have gone bad and might be malfuctioning. Considering Skylines now are 10+ years old, id could be a factor worth considering. As mentioned above, best taking first for a service with a diagnostics and tune. That way, you've got all bases covered. :blush:

cheers guys for the advise, its pretty stock, only mod is cat back, and errr.... it idles just fine, but odly enough the fuel meter sat at half way till it hit 200k's anyways, which is normal for my car dunno about others... so i may just be immagining things ><" but yea ill still go for a full service an diagnostics an tune thingy... ^^ its just hit 106thou k's so its due for one of those major service's so guess ill be needing to do that ^^

Edited by Sneakyazn
I would suspect o2 sensor failure. (or just worn out)

NGK do a replacement for around 40 or 50 bucks.

Its a cheap fix.

Hey Brad, can that be bought at repco or something, I think I might change mine while I'm at it... I've been a bit sceptical about my own fuel usage in recent months.. $50 isn't alot of money to part with for some certainty...

Yeh, get an O2 sensor, they usually go. And will hamper your cruising fuel economy. I have a R32 with RB25 putting out 219rwhp with WOLF 3D tuned. I got 609 km out of a full tank (60L). Which was city driving, highway driving, hard boosting on a car cruise and some stick for fun.

Otherwise fuel leak is probable, but you will probably smell petrol if there is a leak.

Hey Brad, can that be bought at repco or something, I think I might change mine while I'm at it... I've been a bit sceptical about my own fuel usage in recent months.. $50 isn't alot of money to part with for some certainty...

Should have. If not, let me know and i can arrange it for you through my work.

new O2 sensor and u should maybe look at putting a injector cleaning additive in the fuel have heard of this helping. also change your spark plugs. also clean ABV and AMF.

a major service's should be the ticket "Sneakyazn"

ABV and AMF?

ABV = air bypass valve

AMF i meant AFM soz = air flow meter

ABV is cleaned with brake cleaner and cotton buds

AFM is cleaned with AFM cleaner $25 it can be found at any automotive shop

anyone know if high flowed injectors will have worse fuel economy than the sards/nismos injectors .have a set of sr20's high flowed to 600cc and chewing through the fuel. got carbon all over the rear bar and my tuner is trying to tell me its the injectors bad spry patttern, not the tune?

ABV = air bypass valve

AMF i meant AFM soz = air flow meter

ABV is cleaned with brake cleaner and cotton buds

AFM is cleaned with AFM cleaner $25 it can be found at any automotive shop

Oh by ABV you mean the Auxilary Air Control valve and the Idle Air Control valve..

pull the injectors out and sonic bath them, we do them at rotomotion, bring them in, we can tell u how good the spray pattern is

So you work at Rotomotion hey Harry.. I have a set of 1000cc injectors there to be flowtested :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...