Jump to content
SAU Community

Parts Stolen

JJay

By JJay,
in Western Australia

 Share

Recommended Posts

JJay Proficient

JJay

Posted
Posted

Hi All,

Unfortunately on Sunday morning just gone, my R33 GT-R Skyline was broken into and a few parts have been taken from the engine bay and some parts from off the ground.

The parts stolen :-

- Garrett GT45r Turbo KAI BB with a polished compressor cover with a .91 rear housing and TV flange.

- 6Boost manifold to suit RB26 head and has a 60mm wastegate pipe.

- Set of 4pot front Brembo brake calipers.

The build for this skyline is near completion now with only a few minor things left to do but unfortunately due to this inncident, it's now set us back.

The turbo and manifold are not your every day item you buy so if anyone hears of anything, see's anything or has or will read of anything on any other forums that is being sold of this discription, please can you contact me ASAP!!!

Contact Number - 0420 615 315 (If I do not answer, please leave a message or SMS with the details and your contact details please!!!)

There is a reward for information that will lead us to these items.

Any help you can provide also would be much appreciated.

Items were located in Ipswich, QLD.

These are some pic's of the manifold, I don't have any of the turbo on it's own except before it was polished.

So I've attached the ones I have with it bolted to the engine.

6boost-manifold01.jpg

6boost-manifold02.jpg

6boost-manifold03.jpg

6boost-manifold04.jpg

turbo-manifold01.jpg

turbo01.jpg

Link to comment
https://www.sau.com.au/forums/topic/279076-parts-stolen/
Share on other sites
Hanaldo Grand Master

Hanaldo

Posted
Posted

Dammit, i hate people right now. Why do some people insist on taking what isnt theirs, they can never earn for themselves the things that they want.

Sorry to hear man, i hope you get your parts back, looks like it was a great machine. Ill keep an eye out for you

Link to comment
https://www.sau.com.au/forums/topic/279076-parts-stolen/#findComment-4713481
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...