Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Tooo many haters on here.

Rohan, you just need to be smart about it dude. Decent boost controller and/or bleed valve to make sure it doesnt spike. Heat wrapping or turbo bag to protect from the heat of the turbo. Run good oil and fluids, but most importantly make sure you warm up and cool down your car properly.

You are getting towards the limit of your turbo with 1.3 bar, but if you do the small things there is no reason why you should enjoy many happy hours of drifting.

i think i might leave it @ 1 bar with no boost controller, and then hi flow it later and then put the 17psi spring setup in, to keep everyone here happy lol

on 1 bar it bogs sometimes, on 1.1bar it keeps spinning.. which is why i wanted to try it out... i wanna run boost off the gate thus i sold my boost controller...

Can you explain this for us Nismoid?

Boost is just a measure of the resistance of the head, for the shaft to spin quicker on an RB20 there must be less resistance...

I'm no RB20 expert, but what you're saying is the RB20 head flows better than the RB25 head?

If you have 12psi, do you think the turbo is spinning as fast as when its making 17psi?

Nope.

Kyebidz - a turbo beanie is the worst idea one could suggest, right up there with a Bee-r limiter!

Tthe hotter the housing and turbine wheel - the more prone to failure the exhaust wheel is going to be.

Stunn-R try getting a remap or an aftermarket ECU...

also, I think you're more suited on nissansilvia.

running 17PSI on a R33 Turbo, on a RB20 with stock AFM and stock injectors, you got to be kidding.

Is it me? or are there more nissansilvia kids on the SAU forum, some tool just posted this up "Blanking Off Bov" http://www.skylinesaustralia.com/forums/Bl...ov-t279384.html

If you have 12psi, do you think the turbo is spinning as fast as when its making 17psi?

Nope.

Depends how restrictive the head is?

That was kinda my point.

On the same motor, with the same head, with the same turbo and no change in restriction, then of course 17psi is going to require a faster shaft speed. If you were to port the head without touching the turbo, then you would see the same power with lower boost figures (it's about airflow, not "boost").

Boost is ONLY a measure of head restriction, not a measure of shaft speed. Comparing boost levels on different motors with different heads is pointless when trying to determine shaft speed.

lol johhny its not rohan haha

rohan doesnt have a 32 lol

come to a cruise or pm me your number and you canmeet me! i wanna see how keyboard warrioorrrrrRR you are in person lol

Run it at 18psi :iluvff: I had a series 1 25 turbo and ran it at 18psi for about 8 months and never had an issue with it. Even when I pulled the motor out I had a look at the turbo and it seemed happy.

But, if you cant afford to fix it if it does break, then run 12psi. Be smart about it :D

Kyebidz - a turbo beanie is the worst idea one could suggest, right up there with a Bee-r limiter!

Tthe hotter the housing and turbine wheel - the more prone to failure the exhaust wheel is going to be.

the sarcasm of his post must of been lost on you!

we got a neo turbo on a 20det . been thrashing it for ages on 14 psi . have had it glowing red after a boost round the hills . it seems to love it . it doesnt glow anywhere near as good as the 20 turbo used to . yeah not much piont in runnin any more on a stock ecu . but yeah your already pushin more yeah . good shit man . need more threads with "do ers " and not the hot air brigade

Depends how restrictive the head is?

That was kinda my point.

On the same motor, with the same head, with the same turbo and no change in restriction, then of course 17psi is going to require a faster shaft speed. If you were to port the head without touching the turbo, then you would see the same power with lower boost figures (it's about airflow, not "boost").

Boost is ONLY a measure of head restriction, not a measure of shaft speed. Comparing boost levels on different motors with different heads is pointless when trying to determine shaft speed.

Well generally people say the RB20 head is about 30% down on the 25 head.

12 + 3.6 = 15.6... 1.5-2.5psi off the target still

So i say higher shaft speed.

Well generally people say the RB20 head is about 30% down on the 25 head.

12 + 3.6 = 15.6... 1.5-2.5psi off the target still

So i say higher shaft speed.

So you agree that this statement:

i reckon you can run more boost through a 33 turbs on a rb20 compared to a 25 zebra so im gonna have to disagree with you there buddy :P

is absolute rubbish?

For a while there it seemed like you were trying to tell us that 15psi on an RB20 means higher shaft speed than 15psi on an RB25....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...