Jump to content
SAU Community

Recommended Posts

Hey guys, my mate's considering buying an R33 GTR. However we know next to about them. Between us we've owned several R33's, but never a GTR.

Is there a guide or thread somewhere (we did search) that contains information regarding some of the more common problems a GTR encounters, and how to spot them?

Are the RB26's as reliable as their RB25 little brothers?

I don't expect to be given the spoon, but a point in the right direction would be greatly appreciated.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/279614-buying-an-r33-gtr/
Share on other sites

The Magnificent R33 GT-R!!! Aaaaahhh!!!

To watch Kirozawa (in 'Best Motoring') take this fantastic machine around Nurburgring in 8'01" is like poetry in motion!!!

...and of course that wasn't the fastest time - but close to it & on Vid (beating the pants off the NSX & Porsche)!

Try to get a specimen that has...

i) low Kms (and shows it - repeat and shows it)

ii) always serviced

iii) no rust

iv) no damage (or repaired to perfection)

v) no weakened tailshaft (by driving constant motorway speeds & then varied to a different constant speed after a few secs)

vi) no blue smoke

vii) CARE written all over it (ignoring any bandaiding)

You'll just love the way it takes you through undulations, twisties & sweepers!!!

Hey guys, my mate's considering buying an R33 GTR. However we know next to about them. Between us we've owned several R33's, but never a GTR.

Is there a guide or thread somewhere (we did search) that contains information regarding some of the more common problems a GTR encounters, and how to spot them?

Are the RB26's as reliable as their RB25 little brothers?

I don't expect to be given the spoon, but a point in the right direction would be greatly appreciated.

Thanks.

- Synchro's aren't the best in the factory g/box.

- A track abused example will be a money pit.

- A near stock r26dett is quite reliable if its a good example, but they are not easy to find.

- The turbo's will die pretty fast if boosted too much (particularly the back turbo).

- On the track the rb26 suffers from oil starvation which can lead to a blown engine so if you are planning on tracking it do some research because without modification your day could end quite quickly.

Basically if it were me i would be looking for one that is close to stock, i.e only the basic mods; suspension, exhaust, pods and in mint condition.... Finding this will require a lot of patience. :)

Basically if it were me i would be looking for one that is close to stock, i.e only the basic mods; suspension, exhaust, pods and in mint condition.... Finding this will require a lot of patience. :cool:

The Winner of the Best R33 Award at the 10th Anniversary of the R34 GT-R in April is EXACTLY as you say ^^^ :)

I'd ideally add turbos to that modification list given the age of the vehicle. And get a compression test done.

Otherwise, they are ageing, but essentially bullet proof by design. :D

I would rather buy the car with stock turbo's though. Generally if they have been changed they are upgraded and quite possibly not with all the proper supporting mods and as a result mean the car is under more strain. Furthermore if someone has bought upgraded turbo's they are more likely to fang the car.

I just would not buy a GTR with any more mods than those I listed above. But that is just me, depends on what you want the car for and your future plans etc.

- Synchro's aren't the best in the factory g/box.

- A track abused example will be a money pit.

- A near stock r26dett is quite reliable if its a good example, but they are not easy to find.

- The turbo's will die pretty fast if boosted too much (particularly the back turbo).

- On the track the rb26 suffers from oil starvation which can lead to a blown engine so if you are planning on tracking it do some research because without modification your day could end quite quickly.

Basically if it were me i would be looking for one that is close to stock, i.e only the basic mods; suspension, exhaust, pods and in mint condition.... Finding this will require a lot of patience. :D

+1. Basic bolt on mods are tasty but not engine rebuild etc. If you're looking for those you're better off buying a rolling shell and throw the extra cash and custom it yourself.

I would rather buy the car with stock turbo's though. Generally if they have been changed they are upgraded and quite possibly not with all the proper supporting mods and as a result mean the car is under more strain. Furthermore if someone has bought upgraded turbo's they are more likely to fang the car.

I just would not buy a GTR with any more mods than those I listed above. But that is just me, depends on what you want the car for and your future plans etc.

Fair enough too. We all have different ways of going about things. I guess just straight turbos are a relatively cheap modification in the scheme of things anyway.

The Sonic Silver S3 V-Spec for sale on here is very nice if you want to spend a higher than usual amount on an R33. :D

I don't know if its still for sale but do a search for the user Ferni... he has a midnight purple 33GTR for sale that has been built by Racepace... it has the works and will be like night and day compared to a stockish GTR... you will also save yourself $$ by buying one that has already been built to this level

don't buy one with stock turbos, they are hand grenades waiting to go off and you will be up for a full rebuild AND new turbos... that right there is a 10K+ exercise

do all the usual checks you would with any other turbo import... but you must take along somebody who knows RB26's so they can listen for any unusual sounds/knocks... they are a noisy motor but unless you know what your listening for you could get into trouble... if it is modified make sure the owner knows ALL the modifications inside and out... for example if he says 'its got bigger injectors' he should know what brand and size... receipts, dyno sheets etc are good to have as well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...