Jump to content
SAU Community

Lets Drag Race! Wed 5/8/09 Wsid

iplen

By iplen,
in Events Archive

 Share

Recommended Posts

iplen Mentor

iplen

Posted
Posted

Having recently purchased my GTR I am keen to get it on the strip and see what it does, So on wednesday 5/8 I am hitting the strip for the first time. As I will be coming down from Bathurst it is not a chance I get every week. We have 1 180, 1 WRX and the GTR coming down and I would love to see some more GTR's there for the fun of it, I do not expect anything spectacular out of mine (12-13s) But still hope to have some fun!!! So if anyone is heading out, come and say g'day, give me some tips on getting the GTR off the line (with some mechanical sympathy... until I run a 13.1 then it will be all out for a 12.9) I will be in a Gunmetal R32 VspecII hopefully with ZLA32V plates by then.

Link to comment
https://www.sau.com.au/forums/topic/280121-lets-drag-race-wed-5809-wsid/
Share on other sites
luke gtr Grand Master

luke gtr

Posted
Posted

i'll definately try and make it. been trying to get to the track for the last couple of months(and i live in sydney).

last time, done 13.1, with a bad start, and im going to be trying to better that.

hope to see more people there...

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...