Jump to content
SAU Community

Recommended Posts

Please keep this rule in mind before posting:

Defamatory remarks made towards businesses or individuals will not be tolerated on this website - We understand that if you have had a bad experience with a business you want to warn other people of said experience. Unfortunately, the same publicly expressed opinion could be viewed as libelous and/or constitute an attempt to deter business from any individual or business. Australian law holds the site owner partly responsible for any defamatory remarks posted on said website, and that is unacceptable. Informing people via PM's is tolerated as it is not a public message. With this said, feel free to post any information about a business or individual that you have had good dealings with.

My brother brought his 1989 CA18DET 180SX from them in 2002. When he brought it, it was automatic 100% stock and had 44,000KMS on the clock....absolutely immaculate condition.

He never experienced any difficulties with them after purchasing the car, however that was 7years ago, so i can't really comment on what they are like now (i'm not saying they are bad)....

Alot of there cars have low kms but from what I've seen on the interior it doesnt seem too far off. The owner also believes they are genuine. If you take a look at a couple of the 32's they recently got in they are in ALOT better condition than my car. Just paint work, carpet and places that generally wear.

Hi,

I bought my first Skyline from them in Jan 2003. I reckon I got a good deal and they serviced the car for me for the next two years. Overall I was happy with it. The kilometres were low. See pm.

With any import dealer, or even private seller, if they have bought the car through the Japanese auctions, which is 90% certain, then ask them for the auction sheet, which will give the vehicle number (which you can check against the plate in the engine bay) and the kilometres at time of auction. These should be reliable.

Now I would not buy an import without seeing the auction sheet and any service record since coming to Australia. If they won't show you the auction sheet, or a service record and log books from Japan, I would not buy it. You may choose to go ahead, knowing the kilometres have no provenance, but you inevitably take a risk doing so, especially when it comes to the !00,000 km service, when you need to change the timing belt. Maybe just change the timing belt when you buy the car and ignore the kilometres.

Cheers. :)

+1 for what MLCrisis said above, read through the documents before you believe "40'000KMS - super low KMS!!". They write words in Jap but usually numbers are in English, so you can identify KMs, '100'000km' service tags, etc

On Friday I was driving through Maddington/Kenwick and for the first time noticed a particular yard hard a shitload of Skylines...like, all I could see out the front was Skylines.

Didnt catch a name or number, but its where Albany Highway / Kelvin Road (Had a look on Google Street/Maps, can't see anything, but it was definately there), it was on the same side, and around about where that Yank dealer is with all the Corvette's n shit. Somewhere around 1800-1900.

Edited by Nic_A31
On Friday I was driving through Maddington/Kenwick and for the first time noticed a particular yard hard a shitload of Skylines...like, all I could see out the front was Skylines.

Didnt catch a name or number, but its where Albany Highway / Kelvin Road (Had a look on Google Street/Maps, can't see anything, but it was definately there), it was on the same side, and around about where that Yank dealer is with all the Corvette's n shit. Somewhere around 1800-1900.

The yard you are talking about is www.driveawayautos.com.au/ who are at 1878 Albany Highway Maddington, just 2 yards down from Range Ford.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...