Jump to content
SAU Community

Replacing R34 Pop Up Screen With Triple Cluster

99 GTT

By 99 GTT,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

99 GTT Rising Star

99 GTT

Posted
Posted

Please feel free to add to this if you can help.

The idea of the following DIY is to remove some of the confusion getting around this forum about the following install.

Firstly get yourself a flat blade screwdriver and carefully remove the air con vents (may be a good idea to put a rag over end of screwdriver).

Now remove the screws found in the front of the screen and remove from dash.

Ok so now we are ready.

The first and most simple way of doing this would be to obtain the Triple cluster Harness. Hopefully this has come with the Cluster but if not it can be obtained from Nissan Part Number: 24018-AA500.

You will now need to remove the Speedo cluster, this is all of about 8 screws and it will come out. You may have to reach around and remove the 3 plugs from the cluster to remove it fully (good time to see if cluster has ever been removed)

Now it should be as simple as plug and play the triple cluster harness into main loom (see attached diagram)

(Please not the above method i have not tried but as Nissan only make one Main Loom the plug should be there. If some one can verify when they try that would be great)

post-41401-1249146810_thumb.jpg

The second way this can be undertaken would be to slice the wires onto the correct sensors that are located in the engine bay. (Please note that the pinouts on the ecu 47 and 60 can not be used for this)

Please see the following attachment for digram and wiring layout.

post-41401-1249146825_thumb.jpg

Well i hope that this helps someone on here and if i can help any further please ask.

R34 GTR MFD easy to follow DIY help also avalable for R32 R33 R34 Skylines turbo and non-turbo.

Safe Driving To All... ;) 0o SKYLINE o0 :(

  • 2 years later...
  • 3 months later...
madman_rocks Collaborator

madman_rocks

Posted
Posted

haha i had that on my old R34 four door i turn it into a tomtom navi man with defi guages as the top.

Hey I have one with the tv thing Wat size and type and how did u get the tomtom in

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...