Jump to content
SAU Community

Recommended Posts

Ok All,

B4 I get pounced on by those who would happily tell me to go to the g35Driver.com website to find the answer, I have been there and even searched Yahoo for the wiring diagram for my 2002 V35 Sedan Bose Unit. The diagrams don't match those in our JP versions.

So far, I have dismantled all the interior lining of the boot and exposed the connector plug to the Bose Amp and it is a 26 Pin connector.

Does anyone have the wiring diagram to the stock Bose Head unit and the Bose Amp?

And, are the Bose Amps on coupes different from the Bose Amps on the sedans? I know the coupes don't have a subwoofer, whereas the sedans do...I aslo heard the subwoofer unit has it's own amplifier, not sure if it's true though...

This will save me a lot of time playing lottery with the wires. I can't afford to have this done by a professional nor can afford to buy a direct adaptor connector. FYI - I am jobless and refuse to go on the dole....

Any help will be appreciated....

Pic of Bose Amp:

aDSC00124.jpg

Pic of the connector 01:

aDSC00119.jpg

Pic of the connector 02:

aDSC00121.jpg

Pic of Bose Subwoofer:

aDSC00126.jpg

Link to comment
https://www.sau.com.au/forums/topic/281620-head-unit-wiring-diagram/
Share on other sites

I do. that said hat exactly are you trying to do?

if its pull the radio then the poor mans version will be on installdr.com. its the later model plugs and they do give the pinouts on that site.the colours WILL NOT match but the pinout will. if you have $15 buy an adapting lead from autobarn and match the colours. you will have sound albiet entirely too much at once but it will work.

forget about the bose amp side of things. you have already said that you do not have the $$ to get the proper lead. theres a pinout for the OEM amp in the 2003 FSM that is close.

I'm not too sure how technical you are but there s another way to tackle this but it invloves a lot of chasing and cuttng.

Funny you guys should mention made in PRC, I just bought a cheap all-in-one 7" double din touchscreen with Nav/HDTV/Ipod Interface/DVD Player/Reverse Cam input for very cheap...

I couldn't skimp on the fascia, and despite Chris's views on the Metra Unit, I went and bought it from the USA. This is the same unit that JB Hi Fi supposed tried to sell BenzLe. Apparently, everyone bags the Metra Unit due to the A/C probs, but after closer reading, the culprit lies in the pin connectors on the fascia...

I then bought a chinese wide angle reverse cam to replace the factory one and also some reverse sensors.

So once everythign arrives, I will start ripping out the JP Panasonic Nav Brain, Bose Headunit, Factory Reverse Cam, 7" panasonic Screen, etc....

Thanks for the website Chris. I'll try my luck, and go buy a Nissan harness adaptor like you have recommended...

If the whole Bose Amp and Speaker system needs rewiring, I am prepared to do so...since a jobless person should have plenty of time up their sleeve...

Even on a 'tight-ass' budget, replacing the stock unit for an aftermarket one isn't cheap at all, when you factor in all the other sundries required for a decent installation...Hopefully I can recoup some money by selling the Bose head unit with 6 stack MD Player, the fascia, Factory reverse cam, Panasonic 'add-on' system...Sometimes i scratch and wonder why I bought another imported car after the many hard and costly lessons learnt from previous experiences...

Hopefully, when I am done, I can put up a DIY and confirm the harness pin IDs...

Hey guys...

I am also attempting to install a double din headunit also...I actually bought the facia kit from JB hi fi, and it seems my climate control is working good. however there are 3 white plugs but in need of the circuit diagram for the audio...will check out the link....

driving around with half the dash missing....soo annoying...

  • 3 months later...

i'm looking at the audio wiring diagrams. This after my failure to identify the wiring in the skylines. How different is the skyline (non bose)audio system than the g35. The wiring colour codes are not like anything I have seen on this side of the pond.

Shouldn't be too hard...takes trial and error, a volt meter, and a fused bulb screwdriver....u can normally pick out the wire pairs for the respective speakers also. Normally, the thickest wire is the Constant +ve.

Anyway, if you can't do it yourself, go get it professionally done....

  • 14 years later...

Hi Chris,

 

long time since your post, just wondering if you have the Pinout for the v35 stereo plugs, I bought the roem nis2 harness but it doesn’t match the v35 connector.

any help appreciated, I can work out the grn and power constant. But the rest might be hard.

thanks

Tyson

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
    • Its a well known brand in New Zealand; its a rebrand of the Rhino RAV3.  I don't know what the wiring difference *is* between the rev.1 (installed about 15 years ago) and rev.2; but as you say I would think its reasonable that it uses the same immobiliser relay circuits. I had a look but couldnt see a similar harness; but didnt move things around since I didnt want to mess with it   It was one of AVS well known Authorised Installers; I spoke to AVS themselves about it but theyre unsure hence seeking advice more so from the skyline community who are more familiar with the actual car and its wiring. Im in Auckland; but the installer is on the other side of the city so hes very reluctant to come back to even look at it to confirm something isnt connected into the wrong wire.  I dont want to drop the name since they *did* do a really good job for the most part. Everything is very tidy and he fully replaced all the alarm wiring, all the sensors, the wiring to the door motors, installed a switch which was never installed in the first place...really happy with the alarm install itself..just not this one issue. We all make mistakes, if it is the alarm, I just want my fuel pump getting proper switched, fused, power as it was; without having to shell out for an auto electrician to switch a wire and tell me it was the alarm. 
    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
×
×
  • Create New...