Jump to content
SAU Community

Recommended Posts

been having a great time with the car.... high oil pressure, and today, i removed breather lines/intake hoses/pcv valve and gave them a clean, put them back, and the car started nicely, took it for a drive around the block.... *pop* limped home, stalled outside the house, pissing grey/white smoke. car started again, sounded smooth above 2krpm but idled rough then died, more white smoke. now it won't start at all.

my recent oil problems could have been a prelude to my gasket blowing. the smoke comes from the exhaust side up the front of the block. sound like a head gasket and a nice mix of oil & water? opinions please! i really hope it's not something more serious.

Link to comment
https://www.sau.com.au/forums/topic/28171-blown-head-gasket-aaaargh/
Share on other sites

ummm *pop* means what? did it actually sound like a pop, or did it overheat? or did you see the steam./smoke?

well most mechanic should be able to test the gas from the radiator to confirm the blown head gasket!! give em a call and then limp the car down there if you can

Hmmm 'pop' is not good - Whem mine went pop it was 5 ringlands.

When the 'pop' happened were you driving it hard ?

Is there any oil in the cooler piping ?

Have you lost water from the radiator ?

I'd be checking the compression of each cylinder before you go driving it anywhere.

yeah, doing a compression test on the weekend...... didn't check the water coz it was dark. but yeah, made a deep *pop* sound, and i thought it was an intake hose popping off at first... but i didn't hit it that hard, i guess it woulda got up to about 5psi when it blew. no smoke out the exhaust, and with a few revs under no load it was still making 2psi or so, just giving the accell a quick hit. then it died and stopped starting completely, but not before noticing grey/white smoke pissing out of the front left of the block (exhaust side).

water pump? oil pump? gasket? aaaaaaaargh

Dude, dont drive it! Stick it on a tow truck mate, save any more damage being done. I had my head gasket go, but as soon as I saw smoke out the butt end of car, instant shut off! The car never got hot, saving cash on a total rebuild. Just pray it didn't detonate or like others said hope you didn't crack the head. These things are not cheap to repair.

Trust me on that.

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...