Jump to content
SAU Community

Recommended Posts

John

for a manual, they can install as switch on the gear stick (hidden under the gear stick cover) which only allows car to start in neutral. Haven't heard of it being illegal or affecting insurance (since it could actually be part of the whole alarm system which insurance stipulates you have to have).

Worst case scenario is that because the switch is so sensitive, it is still tripped when the car is in neutral and you can't remote start your car. Just take it back and they realign it.

4 doorz

the remote start alarm i have has a protection for both manual and auto.

With auto, it only starts in neutral... and for manual, it works where it only works when your car door is shut and the system is armed while the car is still running (turbo timer feautre).. and if it detects the doors are opened, remote start wont work... so if no doors have been opened, it must still be in neutral.. hence a little bit of safety.

cheers guys, yeah the one i have is incorporated into the whole system and has no saftey though the remote does have a button lock feature, i have never left my car in gear from the day i got it (the car not the alarm) so i dont think it will be too much of an issue, im just trying to keep the car as undefectable as possible.

thanks again for the replys.

  • 5 months later...

I went to install a alarm that has remote start and a few places i talked to refused to do it as it had remote start and they all said it was illegal, there was no mention of auto or manual...

I don't actually want remote start but the alarm i have has it as an option.

one of my mates has a remote in his GTi-R (manual of course) and because he has immobilizer, it moves about 0.5cm then shuts off if its in gear...

ive always known it to be illegal in manual cars...but i spose if it starts in neutral only, it should be ok

Yes. It's one of those laws that looks good on paper but doesn't really work that well in real life. It also leaves the door open for cops who really want to book you for something. A bit like the "unneccessary show of speed" law - it's something to fall back on when there's nothing else they can legitimately do you for, and because it's very subjective, it's hard to argue against.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...