Jump to content
SAU Community

Recommended Posts

performance wise would the PM35 stag , keep up with the nm series turbo stag , i know power delivery would be different , but how much so ? :(

I guess as it is the VQ35DE it would have performance similar to a V35 but with a heavier body.

From what I have read the V35 coupe is doing about a 6.7-6.9 0-100 and the M35 is meant to be about 6.5 - 6.7 0-100.

So I would imagine it would be a tad slower than the Vq25DET.

I also saw today that the 2WD version of the PM35 has a slightly higher diff ration than that of the 4WD version. I guess this is because it would be putting a little more power to the driving wheels (2 only) than the 4WD equivalent.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4751807
Share on other sites

I guess as it is the VQ35DE it would have performance similar to a V35 but with a heavier body.

From what I have read the V35 coupe is doing about a 6.7-6.9 0-100 and the M35 is meant to be about 6.5 - 6.7 0-100.

So I would imagine it would be a tad slower than the Vq25DET.

I also saw today that the 2WD version of the PM35 has a slightly higher diff ration than that of the 4WD version. I guess this is because it would be putting a little more power to the driving wheels (2 only) than the 4WD equivalent.

cheers, that rests my case . stick with the nm35 , unless i can come up with the money to turbo the pm35 :( $$$$$$$$$$$$$$$$$$$$.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4752802
Share on other sites

Don't bag a PM35 unless you've driven one. I initially had my doubts as well but after driving one for 20 minutes, I was truly hooked.

Imo I reckon a PM35 2WD will go as good, if not better than a 4WD NM35. The gearbox is also improved as well in the later models so manual shifting feels a lot more crisp and responds better than the older NM35's.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4752867
Share on other sites

Don't bag a PM35 unless you've driven one. I initially had my doubts as well but after driving one for 20 minutes, I was truly hooked.

Imo I reckon a PM35 2WD will go as good, if not better than a 4WD NM35. The gearbox is also improved as well in the later models so manual shifting feels a lot more crisp and responds better than the older NM35's.

i'd love the current version , but i'd like awd, and i think the awd pm35 might be a bit sluggish, with the extra weight , but then again haven't driven so im being ignorant, might have to see if i can organise a side by side driving test , once compliance is finished with the pm35.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4752950
Share on other sites

The power delivery would be completely different. The NM35 has higher PEAK power and torque but I'd be willing to bet the PM35 has significantly more power and torque up to say 2200-ish rpm, possibly higher.

Dont just look at the power figures on paper, thats just the maximums. If they could quote you "average" torque figures, or if you could get hold of a dyno graph of each (showing power and torque), that might make it easier to compare.

This means that driving around town the PM35 would have a fair amount of get-up-and-go, more so than the turbo model. One extra Litre ought to make quite a difference to low-end torque.

The power delivery would be much more linear in the PM35. but no turbo, no fun - I say, although if you're not into turbos then this isn't likely to matter one bit.

The PM35 would also be better on fuel too. There are many things in its favour...but I'd miss the turbo. :P

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4753128
Share on other sites

The PM35 would also be better on fuel too. There are many things in its favour...but I'd miss the turbo. :P

You would think so... Official numbers state that the VQ35DE powered PM35 is worse on fuel than the VQ25DET powered NM35.

PM35 (VQ35DE) - 8.2km/L = 12.1L/100kms

NM35 (VQ25DET) - 8.9km/L = 11.1L/100kms

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4753143
Share on other sites

You would think so... Official numbers state that the VQ35DE powered PM35 is worse on fuel than the VQ25DET powered NM35.

PM35 (VQ35DE) - 8.2km/L = 12.1L/100kms

NM35 (VQ25DET) - 8.9km/L = 11.1L/100kms

That's could just be the Nissan factory tunes getting worse and worse!

Most people I've spoken to who have been dynoing Nissan vehicles (including imports) have said most of the models just run way too rich, they mainly put it down to bad tuning. Who know's, maybe the fuel companies have a handshake agreement with Nissan :down:

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4753587
Share on other sites

That's could just be the Nissan factory tunes getting worse and worse!

Most people I've spoken to who have been dynoing Nissan vehicles (including imports) have said most of the models just run way too rich, they mainly put it down to bad tuning. Who know's, maybe the fuel companies have a handshake agreement with Nissan ;)

So a tuner thinks that Nissan make a bad tune for a car they build from the ground up, meaning the tuner can do better?

Being that Nissan program the ECU from scratch to have the car appeal to wide audience (more sales), with high reliability...

That is probably not a statement the tuner can back up.

Having said that, I will be in line (eventually) to have my ECU re-mapped.

It's not really bad tuning. The cars run rich so that it reduces the chances of an engine failure.
:)

That's what I heard as well.. Better to be too rich and use a bit more fuel than the lean out and grenade the engine...

:stupid: 's

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4754330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...