Jump to content
SAU Community

Hicas

sturb25

By sturb25,
in Four Door Family & Wagoneers

 Share

Recommended Posts

QWK32 Veteran

QWK32

Posted
Posted
That's exactly what I had but without the heavy steering. :) Definite crab walk. Happens at higher speeds like 80km/h and you need to steer into it and if slow down quick a flick out of it. I recently had work done on the suspension but the steering wheel is not that straight after the alignment and wondered if that had anything to do with it...? Speedo cable is all good.

well if the steering wheel isn't straight that'll be your problem. there are two sensors up in on the steering column that tell the HICAS ecu that you are turning the steering wheel and which way. if your traveling along at at higher speeds, when HICAS becomes active, and because your steering wheel isn't straight the steering sensor is registering that you are turning the steering wheel, even though you really aren't, it will make the HICAS start steering. if your ok to do it yourself just pop the steering wheel off and line it up straight, or just take it back to the place that did the alignment and tell them to sort it out.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4755500
Share on other sites
QWK32 Veteran

QWK32

Posted
Posted
Having a think the sensors aren't in the wheel itself, so the wheel could be on upside down and it wouldn't effect anything. Looks like I'll have to lock up the HICAS.

correct the sensors are mounted to the steering column and the steering wheel boss activates the sensors when you turn the wheel. you should be able to slide the whole steering wheel boss off and jump it over a spline. it will require a fair bit of persuasion to get it off though.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4759332
Share on other sites
GT-R32 Grand Master

GT-R32

Posted
Posted
correct the sensors are mounted to the steering column and the steering wheel boss activates the sensors when you turn the wheel. you should be able to slide the whole steering wheel boss off and jump it over a spline. it will require a fair bit of persuasion to get it off though.

Okay, sweet. Thanks again Josh.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4759336
Share on other sites
zei20l Grand Master

zei20l

Posted
Posted

if you havent removed a steering wheel before, be VERY careful and dont remove the nut completely before you attempt to remove the wheel. leave it on a few turns so it doesnt smack you in the face when youre wiggling it off!

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4759350
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted

Thing is, if the steering wheel wasn't removed immediately prior to this issue, it can't have moved on the spline.

Removing the wheel and re-orienting it will not correct the original source of the problem.

The rack centre position could be offset to one side, causing your problem.

You should turn the wheel from centre to lock in each direction counting the number of turns, if it is unequal in either direction, any adjustment should be made at the rack ends with the rack centred.

Then you can be sure that your rack (and therefore) steering column and wheel are centred correctly.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4759796
Share on other sites
M I K E Mentor

M I K E

Posted
Posted
That's exactly what I had but without the heavy steering. :) Definite crab walk. Happens at higher speeds like 80km/h and you need to steer into it and if slow down quick a flick out of it. I recently had work done on the suspension but the steering wheel is not that straight after the alignment and wondered if that had anything to do with it...? Speedo cable is all good.

what work did you have done to the suspension? height adjustment by any chance?

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4759895
Share on other sites
GT-R32 Grand Master

GT-R32

Posted
Posted
if you havent removed a steering wheel before, be VERY careful and dont remove the nut completely before you attempt to remove the wheel. leave it on a few turns so it doesnt smack you in the face when youre wiggling it off!

Hahaha I've done it a couple of times so won't have that problem!

Thing is, if the steering wheel wasn't removed immediately prior to this issue, it can't have moved on the spline.

Removing the wheel and re-orienting it will not correct the original source of the problem.

The rack centre position could be offset to one side, causing your problem.

You should turn the wheel from centre to lock in each direction counting the number of turns, if it is unequal in either direction, any adjustment should be made at the rack ends with the rack centred.

Then you can be sure that your rack (and therefore) steering column and wheel are centred correctly.

Good luck.

Great post, thanks for that.

might also been the rack bushes too! if they are stuffed, it will cause the rack to move also. its possible its just jammed in the wrong position.

I only just had them done. If some things weren't done correctly can that lead to these issues?

what work did you have done to the suspension? height adjustment by any chance?

Bilstien coilovers, cambers kits and traction rods and all sorts of random shit. I really don't know a whole lot about suspension sorry. :( But definitely height has changed, it's certainly lower.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-4760905
Share on other sites
  • 1 year later...
Raysboostin Mentor

Raysboostin

Posted
Posted

open your eyes before your mouth please

pull ur head in smartass, i was making a valid point about a possible scenario. which has nobody has proven otherwise or posted anything to the contrary. its entirely possible that if the front washed out on turn in, that the rear turning away from the corner could turn you off the road/track. maybe not a common situation but possible none the less.

Link to comment
https://www.sau.com.au/forums/topic/282242-hicas/page/2/#findComment-5918242
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...