Jump to content
SAU Community

Recommended Posts

Have anyone ever fitted the brakes off a Porsche Cayenne turbo into an ER34? Would love to hear the experience and what is required to fit them in.

Mounting brackets?

Discs - need to redrill holes or get a new set?

Brake master cylinder?

Wheel clearance? 18" offset 35 / 38 ok?

etc...

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/282326-porsche-cayenne-brakes-on-a-er34/
Share on other sites

Done it a few times.

Custom billet adaptors, some minor modifications to the upright to clear the adaptors.

Rotors to suit.

Wheels are dependant on the size of the rotor you choose.

Master you need a 1 inch and a bias valve fitted to the rears

Risking, if I were to embark on the project, would you be able to set me up with the adapters? If not, who can get it done (website? email?)

Who makes the rotors to suit the calipers?

The rear bias valve is adjustable?

Appreciate some pointers and/or pics of this conversion.

the one thing i would check on before going ahead woth this project (providing everything else checks out) is how expensive replacement pads are for this style of caliper. I have heard some horror stories about seriously expensive pads for some of this more exotic hardware!!

actually porsche brakes can be had very cheaply.

Speciafically the cup car callipers.

The cup guys tend to replace them oftern and due to the ever increasing demand for affordable motorsport components the callipers are fairly cheap brand new so 2nd hand ones are really well priced.

For example if you pay more than $900 bucks for a second hand set of 997 cup car callipers you paid too much.

Pads new are roughly a grand for the 997 cup car calliper and they are pagids.

Not recommended for road going use though.

Just make sure the Cayenne calipers are not radial mount, if they are it makes the whole eercise too difficult.

Also, Risking makes a very good point, i have had that many sets of calipers and brakes setups and finally settled on my 4 pot Brembos simply because they have the best range of affordable brake pads. $1000 for brake pads is nose bleed stuff for most... err for me :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...