Jump to content
SAU Community

Coilovers + Hypergear Tr43hf Turbo


Recommended Posts

hi all ive got a front pair of cashiew coilovers to suit r32,180sx,s13 coilovers very good condition 8 months old comes with pillowball tops fully adjustable no knocks no leaks upgraded to full set of tien

$350 ono

hypergear tr43hf 5 months old made 243rwkw on 13psi on my rb25 selling due to goin rb30det and need something alot bigger very good condition $500 ono

feel fee to pm or call me on 0412327139

Link to comment
Share on other sites

coilovers are 8kg fronts very coumfy sorry thought there r32 and s13 were the same also turbo came or a rb25 everything bolts up ie lines all bolt up just need to modify dump pipe to suit v band also to the person who pmd me yes i can send to sydney can someone please pm OoskylineoO and tell him i cannot pm i hate this not reply thing let him know to check the thread thanks

Link to comment
Share on other sites

hi all ive got a front pair of cashiew coilovers to suit r32,180sx,s13 coilovers very good condition 8 months old comes with pillowball tops fully adjustable no knocks no leaks upgraded to full set of tien

$350 ono

hypergear tr43hf 5 months old made 243rwkw on 13psi on my rb25 selling due to goin rb30det and need something alot bigger very good condition $500 ono

feel fee to pm or call me on 0412327139

Hi, do you still have the TR43HF? Topgundriftco is interested, but has a problem with his account, give him a buzz on 0419819800

Thank you

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • At the moment still 8mm. 
    • I see what you mean !! 👍 so I drive with E85 AND E100 my cylinder head and full supertech with 270° camshaft and 10.25 lift this weekend I spoke with my mapper and he told me 10 ratio would be even better so I went to set up a setup with : 3.2l crankshaft from expensive spool import with a stroke of 91mm Nitto or IRP connecting rods length 152.5 mm and piston irp ratio of 10 after having the information near spool import the setup did not work because of the crankshaft which is 91 mm  therefore the assembly mounted in the engine block will come out 1mm high above the cylinder head gasket surface so I have to review the construction of the lower engine low IRP is Italian I am French I wanted to limit the costs because as they are in Europe I do not have customs fees to pay 🤷‍♀️
    • Update. Returned yesterday after a two-day venture driving it from Toowoomba, QLD to VIC.  Some bigger shots. However, this was a couple of hours into the rive at a driver reviver stop so you'll need to excuse the bugs across the front and the water from the storm we just escaped.  Looks like at some points both side windows had wind guards and were removed but left behind some kind of silicone or something (?). Any tips on how to remove this stuff appreciated. Noticed the handle for the hood release kind of just fell from its position with nothing fixing it in place to the mount. Looks like two bolts go there. Again, any advice is appreciated. The driver's seat is a Recaro seat in a fixed position (not mounted using the rails, which were in the boot). So the trip one was...more painful than necessary. I'm a bigger guy, so the seat belt was basically tight.  It also has a rip in the seat side closest to the drivers door.  Overall, I'm happy with my purchase.   Now I'm trying to navigate getting the roadworthy and registration here in VIC. Hope it will go well but I know the hood release will need to be fixed for sure.  
    • Your new rig ticks that box 😁 Just let me prep it first    180sx looks weird without it's stickers
    • what size was the return line?
×
×
  • Create New...