Jump to content
SAU Community

Recommended Posts

fkn lol.

245s are a tiny tyre for a 10.5" rim

How many circuit cars have you seen running 245s on a 10+" wide rim?

I agree that too much sidewall flex is bad...but id rather that than no side wall

Of course car enthusiasts give a shit about what the population thinks...you ever been to a car show?

Oh and have you actually seen my car...its hardly built for looks

245s are a tiny tyre for a 10.5" rim

so? they are still fairly big for the car, so why does it matter how wide the rim is?

what rims are you running, brand, model, size, offset, and what tyres are you running, brand, model and size?

How many circuit cars have you seen running 245s on a 10+" wide rim?

how many circuit cars do u see on the road, or drifting, on a budget, running street tyres.

we dont drive circuit cars, u cant compare the 2, use ur head.

Of course car enthusiasts give a shit about what the population thinks...you ever been to a car show?

i think you're confusing car enthusiasts for another group of people who build cars. i build my car for myself, i enjoy getting compliments from other true car enthusiasts, but couldnt give a rats shit about the average joe off the street.

the way u described it was that "why would you do this to ur car for looks, if most people dont like the look of it", that's building ur car for others, not urself, and doesnt have a place in the car scene.

honestly id rather see anyone with that attitude sell their car and get away from the car scene.

I guess you dont care about all the extra unsprung mass the wider wheels have over a wheel more suited to the size of tyre.

WTF does it matter what my rims are. They are sized correctly for the tyres I use.

I guess you dont care about all the extra unsprung mass the wider wheels have over a wheel more suited to the size of tyre.

WTF does it matter what my rims are. They are sized correctly for the tyres I use.

you own URAS NS-01's for christ sakes, u cant lecture me on unsprung weight :D

it matters every bit, here you are making broad claims that about others, u wanna be pretty bloody sure u can back them up with what uve done urself, and be willing to open urself up to criticism.

seriously, im the biggest advocate of quality wheels ull meet, but when it comes down to it, most people on this site setup's are so unrefined, a kg here and there of unsprung weight wouldnt mean shit for majority of what they use their cars for. especially at the expense of sidewall play and improved steering response.

Minor stretch is a great thing from my experience. I run 235/40 on my 18x8.5" up front, 245's would be a definite downgrade to cornering and on an 8" rim would be sloppy as fark just like a falcon... funny that seeing that's what falcons have on their 8" rims.

For a 10.5" 18" rim I would personally use a 265-285/35 depending on guard fitment and what's on the front.

why oh why is this turning into another "stretching your tyres is wrong" thread. there are two sides to every coin.. i like stretch.. the more stretch the better.. i say. build a bridge, and lets band together and fight the real battle... which is cheap shitty chrome wheels.

and i dont care what the population thinks... my front bar is held together by cable ties, the rims are dirty and unpolished. the calipers are a mix of flaking red and brake dust black.... i have never been to car show and my car never will... it is out in the mountains doing what its built to do. not sitting pretty for people to look at. for what its built to do.. stretched tyres work better, look better and i like them more... what you think matters not.

not every car goes straight, round corners, or straight round corners.

and i thought at first bakes wheels were 11" rims to have a stretched 275, but they are definatly 19x9.5" with a +7 offset and stretched 275's.

i say. build a bridge, and lets band together and fight the real battle... which is cheap shitty chrome wheels.

Here Here!!!

My point with the unsprung mass, was i dont see the need to run a 10.5" wide rim if you are only going to use 245 tyres, If you like stretch run 9.5, I just feel (and this is only my opinon) that 245s are a little to stretched and id be worried about de-beading the tyres or damaging the rim if you hit a pot hole / ripple strip etc.

Sure my wheels arnt the bees knees, but they are about half the weight of the Drift-tek copies...and were cheaper...(go figure)

worrying about unsprung mass is fine... but if you going to that sought of extreme... what is your body weight?? where are you seated and how heavy is your seat?? have you lowered the seat mounts and moved the seat back, extending the pedals and steering wheel?? where is your battery?? do you have a high mount or low mount turbo?? given that most of the extra weight in a 10.5" rim will be in the outer rim... it will be bugger all really. say it adds a 500g to 1kg per wheel... thats 2-4kg to the total unsprung weight... but it will be shared amoung all the wheels and wont make that much difference really... unless youve got alloy hubs, 2 piece rotors with alloy hats, alloy calipers, alloy suspension arms, and really good tyres that are already on the limit of their grip... 500g is hardly going to make a difference per corner.

what does a tyre weigh?? 10kg?... and a good quality light wheel 7kg??

im neither for or against the OP getting 10.5" rims... the fact that they are 19's is a bit of a worry, i dont think he is really into cornering or braking... maybe this thread and threads like this should be posted in cosmetic and styling because thats all it is.

My point with the unsprung mass, was i dont see the need to run a 10.5" wide rim if you are only going to use 245 tyres

u dont, but plenty people do, a lot of people think a 10.5" wheel looks better, so they sacrafice a bit of unsprung weight, just like u sacraficed unsprung weight when u decided to buy NS-01's and not a proper lightweight wheel.

id be worried about de-beading the tyres or damaging the rim if you hit a pot hole / ripple strip etc.

have u ever seen a mildly stretched tyre de-bead? i know i havnt, and never had one de-bead myself.

as far as damaging the rim, that's why u buy quality strong wheels, it's the same issue with semi-slicks, hard sidewalls and high grip cause much more stress on the wheel than a street tyre.

Sure my wheels arnt the bees knees, but they are about half the weight of the Drift-tek copies...and were cheaper...(go figure)

wrong. ive owned NS-01's, and used drift teks before, they are similar weights (certainly not half the weight). URAS are a jap company but not a jap wheel manufacturer, they outsource their work (wouldnt suprise me if it's too similar taiwanese/korean/chinese manufacturers like used with Koya).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...