Jump to content
SAU Community

Recommended Posts

hey mate. ive gota cold air intake for a 260... u would need a heat gun to bend it a little lol....

i made if from perspex. pod, pool cleaner pipe to bring air in... (i went threw the intercooler pipe hole coz i had a fmic) and use the stock snorkle.

just a suggestion im planning to use a pod in my standard airbox something like apexi makes because of the size, and use the stock snorkle for feed and also make a cold air feed when i get my FMIC.

duno how you will go with that...

apexi pods are good...but expensive. i used drift pods...sound shit but there great. bracket, pod... get a pipe to go up the hole u will have when you put ur fmic in.... and bend some perspex to make a box. but a hoel for the snorkle n ur set... spray it black if u want a cleaner look.

just a suggestion im planning to use a pod in my standard airbox something like apexi makes because of the size, and use the stock snorkle for feed and also make a cold air feed when i get my FMIC.

I tried the apexi in the air box thing, didn't really work out to well.

You need to cut the front right lower hand corner off so the pod will fit, but then the pod hits on one of the inter cooler pipes causing the whole thing to sit different so the snorkel

doesn't line up any more, If you had a fmic it would probably work better.

I am still using the base but thinking i might make a new top and modify so that the snorkel lines up.

man make your own, im halfway through making mine out of tinted perspex, but wont go on till i got the car fixed and got a fmic in there, making the templates take the most time, but its awesome to make your own,

i got to do a few when im finished for mates with VL's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...