Jump to content
SAU Community

R33 Gearbox Rebuild?

skinkis

By skinkis,
in Western Australia

 Share

Recommended Posts

skinkis Apprentice

skinkis

Posted
Posted

Hi!

I´ve got some synchro scrape/noise when switching to fourth and fifth gear.

I´ve been told that this is a common problem with the R33 manual gearbox.

Who in Perth could rebuild an R33 gearbox and has someone got an idea what it would cost?

Link to comment
https://www.sau.com.au/forums/topic/283155-r33-gearbox-rebuild/
Share on other sites
shaunvlc Enthusiast

shaunvlc

Posted
Posted

yeah but when your synchros are gone its a pain in the ass. cant shift into certain gears at higher rpm's. I mean its still very driveable but as they said you can replace the g/box with one from a wreckers but who knows if that doesn't have the same problems. Replacing synchro's will set you back about $1000 + labour.

Dsturbd Grand Master

Dsturbd

Posted
Posted
Hi!

I´ve got some synchro scrape/noise when switching to fourth and fifth gear.

I´ve been told that this is a common problem with the R33 manual gearbox.

Who in Perth could rebuild an R33 gearbox and has someone got an idea what it would cost?

Try some Redline oil first

RedLineFeva Enthusiast

RedLineFeva

Posted
Posted

I have the same problem, crunches at high RPM going to 4th. might try some Redline oil first, but am considering rebuilding the box if or when it fails.

If i was to get a box from the wreckers is there a fair chance it could be also hammered n soon will scrap?

If i was to rebuild is there any way to make the syncro's and gears stronger with aftermarket parts? or a is there other boxes you can put in that are better / stronger?

Neuroglider Mentor

Neuroglider

Posted
Posted

well if you want your gearbox syncros replaced i had a few replaced and my gearbox fixed up (bearing was fked inside it) at perfect transmissions in bibra lake, awesome guy knows his transmissions! him and a friend were the only ones to actually guess RIGHT what was wrong with my car..all other mechanics wouldve cost me 2k+ (due to them going to replace the clutch first...) only cost me 1k total for new syncros and some bearings fixed oh and new thrust bearing just for the sake of it (even though i had a new clutch in anyway) :P

Neuroglider Mentor

Neuroglider

Posted
Posted

basically took the car to the shop to get a crunching fixed (was the bearing) and he fixed it (he does cash jobs to)

uhm wasn't a recon but he atleast told me the condition of the gearbox which is it's still good (strong gearboxes :()

but yeah...1k cash for labour + syncros (2nd and 3rd i had replaced i think it was...) + bearing + thrust bearing

my advice is though if you DO see him... ask when he actually NEEDS the car.. cause he had mine for a couple of weeks lol before he got to work on it (he can be very busy) like 10 cars somehow fit into his shop... i dunno how haha

good place though ;) great guy

skinkis Apprentice

skinkis

Posted
  • Author
Posted
basically took the car to the shop to get a crunching fixed (was the bearing) and he fixed it (he does cash jobs to)

uhm wasn't a recon but he atleast told me the condition of the gearbox which is it's still good (strong gearboxes :( )

but yeah...1k cash for labour + syncros (2nd and 3rd i had replaced i think it was...) + bearing + thrust bearing

my advice is though if you DO see him... ask when he actually NEEDS the car.. cause he had mine for a couple of weeks lol before he got to work on it (he can be very busy) like 10 cars somehow fit into his shop... i dunno how haha

good place though ;) great guy

Sounds like it´s worth to pay them a visit. Should be alot cheaper if I just get the gearbox of and hand that one in... should save some money on labour...

bubba Grand Master

bubba

Posted
Posted
Sounds like it´s worth to pay them a visit. Should be alot cheaper if I just get the gearbox of and hand that one in... should save some money on labour...

Also what I was thinking.

Anyone know if it's true that 34gtt boxes have dual synchros?

Neuroglider Mentor

Neuroglider

Posted
Posted

i've heard of that before... i can possibly call up the dude who took apart my gearbox lol but yeh... i mean i had the option as well as goin well do i fix my gearbox.. or replace it... it came to the 'if i replace it...it could be as rooted as my current one :S'

so i fixed it :(

skinkis Apprentice

skinkis

Posted
  • Author
Posted
i mean i had the option as well as goin well do i fix my gearbox.. or replace it... it came to the 'if i replace it...it could be as rooted as my current one :S'

so i fixed it :down:

I´ve come to the same conclusion... What if.... That´ll suck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Dose Pipe Sutututu
      Forced Performance Hta Turbos

      By Dose Pipe Sutututu · Posted

      Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...