Jump to content
SAU Community

Recommended Posts

Hi all

first post.... great site by the way,

im looking to import 2 Limos hummer h2.... and wanted to know where and when can i get compliance, i understand the costs may be around 30-40k, or is there some broker that can import and make compliance, ready for rego more or less.... also is any1 familar with the cost of importing a strech limo? i know the shipping comes at a cubic meter rate but i am still not 2 sure what i am up for and if it is just cheaper to get one from here

cheers

Link to comment
https://www.sau.com.au/forums/topic/283598-hummer-stretch-limo-import/
Share on other sites

Hi Hummerman

If you check out the following sites you will find that you are allowed to import a stretch Hummer(built by Krystal).

First site is the approved vehicles.

http://rvcs-prodweb.dot.gov.au/sevs/sevsindex.htm

Second site gives you the firms that are approved to comply them. If you wish to import an approved vehicle, you have to get the (RAW) to do the Gov. paper work and the complying. You MUST check with them first to see if they will do the job. I have had experience with some who are approved but did NOT want to comply other peoples vehicles, they wanted to only do their own imports. But with the down turn in the market now I do not think that happens anymore.

http://raws.dotars.gov.au/rawswebpublic/RA...rch.asp#results

All of this can be very daunting if you do not know what you are have to do. Maybe better to purchase your stretches here. I have brought in over 40 vehicles from Japan, so I kinda know what is involved.

As for importing from the States, if the vehicle can fit in a container(20ft or 40ft long) it is better than deck cargo(set charge for a container no matter how much you put in it) just phone a shipping company to get a quote. You can put 2 vehicles in the one container(one on the bottom then the other one sits on a frame on top, if the 2 vehicles are to high they are put in an open top container then the top has a cover put over it(these are then Top Loaded on the ship). Also it is protected way better. Dock workers DO NOT treat vehicles very well. They will steal parts, damage when moving around etc. (speaking from experience) but when it's locked away in a container they find it a lot harder to get at. Also, when purchasing from overseas beware of the exchange rate. Add that to the shipping/customs fee/10% GST/15% duty/quarantine fee/towing /compliance/changing from left to righthand/ etc. and the cost sure adds up quickly. Vehicles may seem cheap to purchase in the States, but are they worth it in the long run???? Also, Are you going to go to the States purchase the cars, do all the paper work re customs/markings etc. arrange the shipping, put them in the container, tie them down, arrange for them to be taken to the wharf and so on? There is a lot involved. You can get a broker over there to do all of this for you AT COST. All something to think about.

Hope this helps you

bobw

Hi Hummerman

If you check out the following sites you will find that you are allowed to import a stretch Hummer(built by Krystal).

First site is the approved vehicles.

http://rvcs-prodweb.dot.gov.au/sevs/sevsindex.htm

Second site gives you the firms that are approved to comply them. If you wish to import an approved vehicle, you have to get the (RAW) to do the Gov. paper work and the complying. You MUST check with them first to see if they will do the job. I have had experience with some who are approved but did NOT want to comply other peoples vehicles, they wanted to only do their own imports. But with the down turn in the market now I do not think that happens anymore.

http://raws.dotars.gov.au/rawswebpublic/RA...rch.asp#results

All of this can be very daunting if you do not know what you are have to do. Maybe better to purchase your stretches here. I have brought in over 40 vehicles from Japan, so I kinda know what is involved.

As for importing from the States, if the vehicle can fit in a container(20ft or 40ft long) it is better than deck cargo(set charge for a container no matter how much you put in it) just phone a shipping company to get a quote. You can put 2 vehicles in the one container(one on the bottom then the other one sits on a frame on top, if the 2 vehicles are to high they are put in an open top container then the top has a cover put over it(these are then Top Loaded on the ship). Also it is protected way better. Dock workers DO NOT treat vehicles very well. They will steal parts, damage when moving around etc. (speaking from experience) but when it's locked away in a container they find it a lot harder to get at. Also, when purchasing from overseas beware of the exchange rate. Add that to the shipping/customs fee/10% GST/15% duty/quarantine fee/towing /compliance/changing from left to righthand/ etc. and the cost sure adds up quickly. Vehicles may seem cheap to purchase in the States, but are they worth it in the long run???? Also, Are you going to go to the States purchase the cars, do all the paper work re customs/markings etc. arrange the shipping, put them in the container, tie them down, arrange for them to be taken to the wharf and so on? There is a lot involved. You can get a broker over there to do all of this for you AT COST. All something to think about.

Hope this helps you

bobw

What kind of cost would a broker take for such a service?

What kind of cost would a broker take for such a service?

Hi

I have no idea how much they charge, i have never used one.

BUT the following site is an Australian company that specializes in bringing in odd items from the states(boats, motor homes, trucks , cars etc.). They are extremely helpful. They will guide you through the maize and put you in touch with the right people in the states. If you have any queries don't hesitate to ask them. Of course, they charge a fee for their service. But it's worth it...

Ian Mcindoe [email protected] Skype: Ian.Mcindoe PO Box 931 Burleigh Heads Queensland 4220 Office +61 (0)2 66426724 Mobile +61 (0)404056363 www.import-a-boat.com.au Please contact him.

Have fun

BobW

I wouldn't import any stretch hummers unless you have the ok from the current guys (find out yourself which "chapters" own them), or untill the cops throw them all in jail.... unless either of those happen i'll bet $1000 the hummers will get fire bombed.... then again i don't know your background.

Just make sure you do ALL the necesary homework first

also from experience a container would be between $1500-$3500 australian$ from the states + insurance because allot of containers do fall of the ships. im half sure that you won't have to convert the car to right hand drive, i know they changed the laws about that.

But as i said before check around first...

good luck

also from experience a container would be between $1500-$3500 australian$ from the states + insurance because allot of containers do fall of the ships. im half sure that you won't have to convert the car to right hand drive, i know they changed the laws about that.

But as i said before check around first...

good luck

how do i find out if it can be left RHD or not?

btw thanks for the info

how do i find out if it can be left RHD or not?

btw thanks for the info

Simple as ringing up the RTA, they would also probably be able to give you some info on getting the car compllied and anything else they are likely to require to get it registerd

jst curious but are hummerman and bobw the same person? both low joined on same day n have same posts. One asks about hummer imports, the other gives a reference to an importer, a website etc.....advertising

looks sus aye

come to think of it i think in the last few years they let classic cars (think over 30 years old) stay as left hand drive (eg 60's caddilacs and stuff)

jst curious but are hummerman and bobw the same person? both low joined on same day n have same posts. One asks about hummer imports, the other gives a reference to an importer, a website etc.....advertising

Sorry Jonny/Kujotk we are not the same person.

I don't know who hummerman is. Never met him

I joined to get info about V35 Skyline. I intend bringing one in myself, for myself. I happened upon the Importing Vehicles topic by chance. As I have had experience at importing many cars, trucks, jetski's from Japan I just wanted to help someone. There are so many pitfalls that one can fall into and if I can save someone a lot of bother, whats wrong with that? AND UNLIKE OTHERS, I HAVE NO CONNECTION WITH ANY COMPANY OR WEBSITE I HAVE GIVEN. I AM NOT IN BUSINESS NOR WOULD I ADVERTISE FOR ONE. Also, I have never used that company nor do I need to, I do everything myself. All I know is that they are very helpful.

I just wanted to help the man out, that's what this whole website is about!!! Is that okay with you? Or do you think that everyone who gives out free info is sus or adverstising?

The moderators can check to see if your accusation is true or not, and then they can take the appropriate action if necassary.

I wouldn't import any stretch hummers unless you have the ok from the current guys (find out yourself which "chapters" own them), or untill the cops throw them all in jail.... unless either of those happen i'll bet $1000 the hummers will get fire bombed.... then again i don't know your background.

Just make sure you do ALL the necesary homework first

Funnily enough I work for a major stretch hummer limousine companys in Sydney. One of the few. Not sure what you mean Kujotk by chapters?...lol

All I can tell you is its not cheap.

If you're gonna get one, get a pink one. We need someone to own one in our industry. Don't ask me why we get pink requests, it just seems to be a colour choice of the moment.

Edited by JI34GT
Hi all

first post.... great site by the way,

im looking to import 2 Limos hummer h2.... and wanted to know where and when can i get compliance, i understand the costs may be around 30-40k, or is there some broker that can import and make compliance, ready for rego more or less.... also is any1 familar with the cost of importing a strech limo? i know the shipping comes at a cubic meter rate but i am still not 2 sure what i am up for and if it is just cheaper to get one from here

cheers

I hope you dont mean 30-40k per stretch hummer limo. add another zero in there mate. :cool: lol

Afaik you have to get them 'stretched' here. There's a company that specialises in this field.

Funnily enough I work for a major stretch hummer limousine companys in Sydney. One of the few. Not sure what you mean Kujotk by chapters?...lol

All I can tell you is its not cheap.

If you're gonna get one, get a pink one. We need someone to own one in our industry. Don't ask me why we get pink requests, it just seems to be a colour choice of the moment.

Mate,

since u work with these guys, maybe u can tell me how they got their hummers in and what they cost?

I hope you dont mean 30-40k per stretch hummer limo. add another zero in there mate. :D lol

Afaik you have to get them 'stretched' here. There's a company that specialises in this field.

30-40k just for the conversion.... nothing more, i am expecting it to cost approx 200k complete and registered

jst curious but are hummerman and bobw the same person? both low joined on same day n have same posts. One asks about hummer imports, the other gives a reference to an importer, a website etc.....advertising

Nahh champ not same person.....

im just trying to find some1 who can help me, i dont care where the help comes from ill take it. To be honest the best person so far has been a guy from Tasmania, but i would prefer Syd.... Cant believe its so hard to find someone

Sorry Jonny/Kujotk we are not the same person.

I don't know who hummerman is. Never met him

I joined to get info about V35 Skyline. I intend bringing one in myself, for myself. I happened upon the Importing Vehicles topic by chance. As I have had experience at importing many cars, trucks, jetski's from Japan I just wanted to help someone. There are so many pitfalls that one can fall into and if I can save someone a lot of bother, whats wrong with that? AND UNLIKE OTHERS, I HAVE NO CONNECTION WITH ANY COMPANY OR WEBSITE I HAVE GIVEN. I AM NOT IN BUSINESS NOR WOULD I ADVERTISE FOR ONE. Also, I have never used that company nor do I need to, I do everything myself. All I know is that they are very helpful.

I just wanted to help the man out, that's what this whole website is about!!! Is that okay with you? Or do you think that everyone who gives out free info is sus or adverstising?

The moderators can check to see if your accusation is true or not, and then they can take the appropriate action if necassary.

relax the mods wouldnt bother with such a weak coincidence, it just looks sus and even if lets say for arguments sake that the scenario we said earlier was true, how can anyone proove it? Relax and have a good time on the forums.

Cheers

Mate,

since u work with these guys, maybe u can tell me how they got their hummers in and what they cost?

slab of beer might get him to talk lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...