Jump to content
SAU Community

Recommended Posts

I noticed a thread started about quarter mile times for a standard R35 GT-R...

So, curiousity got me thinking what would be the best quarter mile time achieved for each of the models in standard, factory specification. I believe that the R34 can achieve high 12 second times running on standard equipment. If anyone can add quicker times than those listed below, please feel free to post these with supporting evidence. :)

R32 GT-R: 13.7s

R33 GT-R: 13.8s

R34 GT-R: 12.98s

R35 GT-R: 11.89s

Edited by Shinrai
Link to comment
https://www.sau.com.au/forums/topic/283646-gt-r-quarter-mile-times/
Share on other sites

my car was the test car for HPI and appeared on the cover of the GTR special no.1...bog stock it ran 12.9.

EDIT: sorry it actually had a HKS catback exhaust and M's pod filters fitted. Everything else was standard.

Edited by DiRTgarage

The quarter mile times I have seen vary on the internet and published magazines.

Just from memory I remember seeing...

R32 GTR: 13.7 secs (Wheels Magazine 1992) to 12.8 secs

R33 GTR: 13.8 secs

R34 GTR: 12.9 secs and 12.7 secs for the V-Spec II N1 Version (Wheels Magazine 2002).

my car was the test car for HPI and appeared on the cover of the GTR special no.1...bog stock it ran 12.9.

EDIT: sorry it actually had a HKS catback exhaust and M's pod filters fitted. Everything else was standard.

Is that an R32 that you are talking about? It is quite interesting that 13.7 is mentioned as the quarter mile achievable for the earlier revision of the RB26 engine but you mention that 12.9 was achieved. I guess it depends on the driver. I guess a stock R33 could achieve a very similar time although with a slightly heavier weight it might be a fraction of a second slower

That and from memory, the R34 GTR is lighter in weight + a bit more torque.

Oh yes, I am aware of those benefits too. I agree that would add to the quicker time. :D

Edited by Shinrai

Impressive numbers but i assume they test with great drivers and dump that clutch hard on redline; not the way we would treat our cars....well at least i wouldnt.

I know the r34 gtr's new turbines produce better low end torque to help with the launch resulting in the better time.

That and from memory, the R34 GTR is lighter in weight + a bit more torque.

you'll find its more to do with some other interesting factors...

fuel, tyres, gearbox etc etc.

Back in what, 1992, a RB26 wouldn't make the power it would today, nor the speed (r34 gearing is different)

You would need to put a R32, R33 & R34 together TODAY, and test. That would be more accurate.

Also did motor test on a drag strip? Were the others tested on a drag strip?

A R34 certainly isn't lighter :down:

you'll find its more to do with some other interesting factors...

fuel, tyres, gearbox etc etc.

Back in what, 1992, a RB26 wouldn't make the power it would today, nor the speed (r34 gearing is different)

You would need to put a R32, R33 & R34 together TODAY, and test. That would be more accurate.

Also did motor test on a drag strip? Were the others tested on a drag strip?

A R34 certainly isn't lighter :D

True about the gearing in the R34 GTR.

Was not too sure where Wheels magazine tested the car, I will have to read the article again.

The quarter mile times I posted are from a mix media, internet and magazines.

Publish articles are more solid prof then from an internet website, unless its an official website of some sort... To me it is just an overall idea of how fast the cars are.

I notice when Wheels Mag redo a segment on the R32 GTR, they just put the 13.7 secs (Claimed back in 1992) seem like they don't not bother testing it as it has been done...

Just from doing a bit of reading, the R32 GTR weights about 1430 kg, the R34 GTR is about 1540 kg and the R33 GTR (websites have said) 1750 kg...

So in relation to the R34 GTR being lighter then the R33 GTR.

Any clarification for the weight in's of the cars would be welcome...

:down:

Just from doing a bit of reading, the R32 GTR weights about 1430 kg, the R34 GTR is about 1540 kg and the R33 GTR (websites have said) 1750 kg...

So in relation to the R34 GTR being lighter then the R33 GTR.

Any clarification for the weight in's of the cars would be welcome...

:thumbsup:

There is no way that a R33 weighs 1750kg... Which websites are incorrectly stating that?

R33 GT-R is 1530kg and the V-Spec version is 1540kg. So the the R33 and R34 are almost identical in weight bearing precedence to the fact that it is the superior components on the R34 that results in the better performance.

As above the R33 GTR weights 10kg lighter than the R34, but 50kg heavier than an R32, look at a website with real specs, there is no way the R33 added a couple hundred kilograms...

R33, 1530kg (non Vspec):

http://www.jbskyline.net/R33/GTR/Specs/

R32, 1480kg (non Vspec):

http://www.jbskyline.net/R32/GTR/Specs/

Do the math :thumbsup:

There is no way that a R33 weighs 1750kg... Which websites are incorrectly stating that?

R33 GT-R is 1530kg and the V-Spec version is 1540kg. So the the R33 and R34 are almost identical in weight bearing precedence to the fact that it is the superior components on the R34 that results in the better performance.

- http://www.r33gtr.com/r33_gtr_info.html

But that was stated as the V-Spec Version... I remember V-Spec versions of the R32 and R33 GTR's were a bit heavier.

It also does mention 1530kg.

Anyway, going by some_cs_student site and the my one looks like it is 1530kg (Non V-Spec).

So correction to my 2nd post in this thread, the R33 GTR is lighter then the R34 GTR.

As above the R33 GTR weights 10kg lighter than the R34, but 50kg heavier than an R32, look at a website with real specs, there is no way the R33 added a couple hundred kilograms...

R33, 1530kg (non Vspec):

http://www.jbskyline.net/R33/GTR/Specs/

R32, 1480kg (non Vspec):

http://www.jbskyline.net/R32/GTR/Specs/

Do the math :D

Thanks Gareth!

I noticed a thread started about quarter mile times for a standard R35 GT-R...

So, curiousity got me thinking what would be the best quarter mile time achieved for each of the models in standard, factory specification. I believe that the R34 can achieve high 12 second times running on standard equipment. If anyone can add quicker times than those listed below, please feel free to post these with supporting evidence. :D

R32 GT-R: 13.7s

R33 GT-R: 13.8s

R34 GT-R: 12.98s

R35 GT-R: 11.89s

R32 GT-R: 13.1s (refer article below, its not the clearest scan)

r32_review1_37.jpg

I think it is a bit unfortunate that with the R35 having been released it has made it seem that the RB series cars are a bit sluggish.. But when you look through the current wheel/motor, have a look at performance time for some of the quick cars that are in there...

XR6T: 13.5

SS: 13.4

CLUBBIE: 13.5

EVO X: 13.9

RS6:12.1

M3 (AUTO): 12.9

CLS63 AMG: 12.8

M3 (MAN) 13.2

911 CARRERA S: 12.6

Nissan claims Wheels mag

R32 13.7

R33 13.5

R34 13.8

Wheels mag

R33 12.7

R34 13.1

Article in previous post

R32 13.1

I was pretty sure one of the aussie mags got a 12.9 out of the R32, but I could not find the article, but Wheels first test of an Aussi R32 is 13.7,

It is interesting that the fastest time mentioned here for the R33 GT-R is quicker than the fastest R32 GT-R time. I would have thought with the slightly lighter body weight that the R32 would have had the advantage.

Either way they are all great cars.

By the way, I'd love a R35... Just might need to wait a few years for them to come down in price. :P

Edited by Shinrai

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...