Jump to content
SAU Community

Garrett Gt35r Kit For Rb25

HKS-R33
 Share

Recommended Posts

HKS-R33 Experienced

HKS-R33

Posted
Posted

Hey, ive got my turbo setup off my r33 for sale. All parts have done about 5000km and are in very good condition.

I have all parts to make a complete kit for an r33.

Garrett GT35R with .82 ex housing $1300

Oil and water lines $150

Modified RB25 Manifold $150

Tial 44mm Wastegate $500

Front Pipe with wastegate plumbed in $250

I will get the turbo checked by Rotomaster (Garrett Distributor) to assure the new owner that the turbo is in good condition.

Thanks, Mike.

DSC00925.jpg

DSC00926.jpg

DSC00932.jpg

DSC00934.jpg

DSC00939.jpg

Link to comment
https://www.sau.com.au/forums/topic/283842-garrett-gt35r-kit-for-rb25/
Share on other sites
HKS-R33 Experienced

HKS-R33

Posted
  • Author
Posted

280kw on 18psi, hit full boost around 4500 and im selling all my gear because im building an RB26 with twins and wont need all this.

Turbo capable of making 340kw+ with a good setup.

Thanks, Mike.

HKS-R33 Experienced

HKS-R33

Posted
  • Author
Posted

I have had a lot of interest for individual parts but would prefer to sell as a whole or at least sell the turbo with the lines etc as it will make it harder for me to sell just the lines.

Also for anyone asking, I am after $2250 for the lot

Thanks, Mike.

WYTSKY Veteran

WYTSKY

Posted
Posted

not sure whether u received my pm or not..

but if you happen to sell the turbo in the next month, i'd be happy taking the manifold and probably gate from you.

Also, the oil and water lines - oil lines braided?

Cheers,

Adam

judd33 Collaborator

judd33

Posted
Posted

any chance you can pm or put pics of front pipe in thread,just bought same turbo,but with 1.06 AR that will put going on my rb25/30 engine,was looking to get the wastegate plumbed through the exhaust system for legal reasons!would it suit a 50mm turbosmart progate which i will be getting as well!

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...