Jump to content
SAU Community

R34 Gt Belts...

ontheranch

By ontheranch,
in South Australia

 Share

Recommended Posts

ontheranch Experienced

ontheranch

Posted
Posted

Hey,

Im having trouble getting the correct belt numbers for my GT, Repco etc dont have a listing for the Neo GT and I dont want to end up with the wrong ones. Im pretty sure they arnt the same as the Turbo model nor the 33 Non Turbo... I could be wrong though.

I have Bosch belt numbers but they dont match up with the ones Repco have....

Any help would be good. :P

I need Aircon, Alternator/Water pump and power steering belts.

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/
Share on other sites
RubyRS4 Grand Master

RubyRS4

Posted
Posted

The belt numbers should be useful to Repco anyway. Belt 4TK910, for example, is also 40910 on the parts list. "4" stands for 4 ribs, and "910" is the length, and so on with the other belts. Have you priced them at Nissan?

I get my car back at lunchtime ... I peek under the bonnet and get my numbers. T and non-T Neo motors should be the same surely.

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4776105
Share on other sites
ontheranch Experienced

ontheranch

Posted
  • Author
Posted

Ah Ok,

Nah I havent called Nissan....

You would think they would be the same but they have different oil filters and stuff so I just wanted to make sure.

Im desperate, the one bird under my bonnet now sounds more like a jungle.

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4776139
Share on other sites
ontheranch Experienced

ontheranch

Posted
  • Author
Posted
While on the topic of belts, etc. Does anyone have the Gates Racing Belt Codes for the R33GTST? I am looking mainly at ruby here, cos of the place he got his from.

http://cgi.ebay.com.au/NISSAN-SKYLINE-R33-...p3286.m20.l1116

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4776587
Share on other sites
RubyRS4 Grand Master

RubyRS4

Posted
Posted
While on the topic of belts, etc. Does anyone have the Gates Racing Belt Codes for the R33GTST? I am looking mainly at ruby here, cos of the place he got his from.

Just double check your stock belts first against what is quoted in that ebay link given by Penny. They did get one of my belts wrong ... but made up for it.

This Mico-V /Drive belt kit contains the following parts: 1x 4PK835R 1x 4PK865R 1x 4PK925R

I believe you need something like 1x 4PK865R 1x 4PK890R and 1x 4PK925R

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4776653
Share on other sites
Aberax Grand Master

Aberax

Posted
Posted
gates??? more like goatse :)

Really?! Why's that?

Thank you :P

Just double check your stock belts first against what is quoted in that ebay link given by Penny. They did get one of my belts wrong ... but made up for it.

This Mico-V /Drive belt kit contains the following parts: 1x 4PK835R 1x 4PK865R 1x 4PK925R

I believe you need something like 1x 4PK865R 1x 4PK890R and 1x 4PK925R

Thanks Ruby, its just that i don't want to go through what you did, as its going to be a few weeks/months before they get installed and if its the wrong ones, then they may not swap after that long a time.

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4777065
Share on other sites
nugzy31 Proficient

nugzy31

Posted
Posted

just that dayco have a far more superior warranty setup if need be...also all the R&D that have gone into dayco exceeds the quality of gates belts....im not just saying this because i sell dayco....but from experiences with both products on my own cars

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4777972
Share on other sites
Aberax Grand Master

Aberax

Posted
Posted
just that dayco have a far more superior warranty setup if need be...also all the R&D that have gone into dayco exceeds the quality of gates belts....im not just saying this because i sell dayco....but from experiences with both products on my own cars

Can you send me a pm with prices for a set of Dayco belts for my car? Also if you can get a timing belt too.

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4778034
Share on other sites
  • 2 weeks later...
ontheranch Experienced

ontheranch

Posted
  • Author
Posted

Replaced all my belts... and guess what...

ITs still F&%* Sqeeking! Tightened them twice now. Then thought there may be left over belt grip making the noise so I degreased the lot and it didnt help.

I am sooo over it.

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4800576
Share on other sites
RubyRS4 Grand Master

RubyRS4

Posted
Posted
Replaced all my belts... and guess what...

ITs still F&%* Sqeeking! Tightened them twice now. Then thought there may be left over belt grip making the noise so I degreased the lot and it didnt help.

I am sooo over it.

Shoot down to my place and I'll take a peek under the bonnet for you. Perhaps waterpump?

Link to comment
https://www.sau.com.au/forums/topic/284075-r34-gt-belts/#findComment-4800866
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • bilbo117
      Gtr-registry.com: Now All R32/r33/r34 Gtr Details - Full Registry - Submit Photos/info

      By bilbo117 · Posted

      Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...