Jump to content
SAU Community

Recommended Posts

Item: 2000 Model Hyundai Accent

Location: Mackay

Website: This one for now

Item Condition: Good Condition

Reason for Selling: Need to clear up some debts and build a Shed

Price and Payment Conditions: $13000 Very Negotionable (MAKE AN OVER FOR BOTH OF OUR CARS AND MAYBE GET A BARGAIN - CHECK TOPICS)

Extra Info:

This is from original add when my partner Bought it

engine

Only done 20,000 (19,007) kms since rebuild - Car has done 137 807 kms, perfect cond.

Engine has high detail

1.5 Bored to 1.6 – Gold Rocker Cover, Forged oversized Pistons, Port Polish, Conrods, Freeze treated Valves and Cams, titanium valve springs, tube and fin intercooler, 2.5 inch ceramic coated custom pipework, Custom high mount manifold ceramic coated, TD04 Turbo ceramic coated with custom oil feed and return, polished Aluminium Airbox, Blitz air filter, Mach 1 GFB Blow off valve, Malpassi rising rate fuel pressure regulator, 550cc injectors, Bosch fuel pump, Custom fuel lines with return fuel line, stand alone engine management Microtech LT10S with ignition module, 3 inch custom dump pipe also ceramic coated, 2.5 inch exhaust, 3 inch hi flow cat convertor, 5 inch magnaflow canon muffler, Exedy Brass Button Clutch, shortened shifter.Custom water spray, on 10 pound boost (stock)

But comes with manual boost controller (not fitted.)

Interior

full black Leather interior , 2006 prototype ford focus gear knob,7 guages, boost, oil pressure, Water Temp and air fuel ratio, monster tacho, volts, oil temp, Custom polished aluminium door handles, chrome air vent grilles, Alarm with imobiliser, second manual imobiliser, Engine Start Alarm, pillar mount, flushed boot trim

Suspension/wheels

fully adjustable k sport coilovers front and rear damper and height, camber castor etc.

18 inch Lite 6 speedy rims forged and weighing only 8 kilos each with no tyre Gold and silver , rolled front and back guards ZR18 215 35

Stereo

2 sets of jaycar response 6 inch splits back and front, boss amp 4 channell 1000 watt amp, 500w clarion amp 7 inch clarion flip out tv touch screen dvd etc 06 model 1 farad Capacitor, car is sound proofed for big bass, no vibrations at all. 2x 12 inch 1000w clarion subs in s/steel box, box is clarion

Body

Custom jetspeed front bar with sick division side skirts and back bar customized to be lower by jetspeed, Imported Rear taillights from Korea twin brakelight, custom reverse lights hidden under custom back bar, Flushed rear door trim. Custom grill, also has eyelids, will a custom bonnet vent made within the next week or so above turbo/radiator for cooling, will look good

Power-115kw (had nitrous but not used will sell with nitrous w/purge and new tyres for extra $2500)

Had major service done including-

New oil filter

Pod filter

Fuel filer

Oil (motul turbolite 10w-40)

Timing belt

Coolant- also put in ice purple keeps engine cooler)

Thermostat

Was loosing oil (not much not even noticeable) did oil rings and also valve regrind (all gaskets on engine really) perfect now

Reconditioned turbo (costs more than to buy a new one!!)

Car hasnt changed much. Got rid of the Air Box it was just drawing heat, made a custom cold air for it. Had to take eye lids off due to a deffect. Had a small water leak so i replaced the water pump, thermostat timing belt etc while the coolant was drained. Nothing was wrong with any of it but i did it anyway. I will check exact kilometers when i get home and upload current pics.

Pictures:

post-10000-1250823797_thumb.jpg

Contact Details:

Via Pm

Link to comment
https://www.sau.com.au/forums/topic/284395-turbo-hyundai-accent/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...