Jump to content
SAU Community

Rb25/rb30 Vct Questions

JVDSKYRINE

By JVDSKYRINE,
in Engines & Forced Induction

 Share

Recommended Posts

JVDSKYRINE Explorer

JVDSKYRINE

Posted
Posted

Okay well here is my question. If I am building a RB25 head with 270 cams and valve springs and retainers with adjustable cam gears. If I plan on not using the vct do I still need to feed the VCT with oil? In all the threads I have read they show ways to get oil to the VCT but no one talked about if you are not using the VCT does it still need oil run to it or not?

Sorry I am having troubles understanding the VCT. If the answer is yes there is lots of info on how to get oil to it.

And also if you are using agressive cams and upgraded everything else is there any benefit to running vct? or is it useless?

Link to comment
https://www.sau.com.au/forums/topic/284486-rb25rb30-vct-questions/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bullet300
      R34 Gt Auto Tuning

      By bullet300 · Posted

      My son has an R34 gt auto. I'm looking at methods on how to tune it with the view to be able to further tune it down the track when he is off his P,a and can go turbo. The issue is the 98 gt auto has a seperate TCM and is not compatible with swapping out a gtt auto nistuned pcm ( from what I have read so far ) Please if anyone has info on what to do here I would much appreciate. Realise that some options include manual swap, manualised valve body. Just hoping there is a more direct running option I haven't been able to find. Thanks in advance. 
    • Jumbotron
      R34 GTR 4.11 gears: use R33 GTR speedo sensor?

      By Jumbotron · Posted

      Hi Everyone, I did 4.11 gears in my 34 GTR and only thing that remains is to fix the speedo reading (it reads about 15% higher) using the R33 GTR speedo sensor. Few questions:   1. Does the R33 speedo sensor fit right in to the 6sp getrag? I read it does but wanted to confirm because the speedo sensors between 33 and 34 look quite different   2. The connector on the 33 speedo sensor will not plug into the connector on the getrag. Do I just need to wire the pins together manually?  See pic: https://imgur.com/a/NTDzFe8
    • joshuaho96
      R34 rb25det neo lower timing belt cover bolt part numbet

      By joshuaho96 · Posted

      Looks like 08120-62033 to me?
    • drifter17a
      R34 rb25det neo lower timing belt cover bolt part numbet

      By drifter17a · Posted

      Does anyone know how I could find the part number for bolts used with  r34 with rb25detneo engine lower timing belt cover?   my timing cover was rubbed and i fixed it but upon putting the harmonic balancer i see the timing cover is almost rubbing and that is due to previous owners using general bolts and washer rather than the bolts per link below which sits inside the washer and pull the cover in   not sure if those bolts will fit rb25   https://www.ebay.co.uk/itm/326510870741?gad_source=1&gbraid=0AAAAAB_7XZxjuciMybdVOTShCs9857686&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338723872&toolid=20006&customid=7jIl12glAAAAVfHSSnyxAmSsdRxnAAAAAA
    • joshuaho96
      Nismo rear spats

      By joshuaho96 · Posted

      If the slightly higher internal EGR caused by a high flow cat causes detonation your tuner was way, way, way too aggressive to begin with. Timing scatter is a problem unless you go to a crank trigger, winter vs summer blend has different octane, list goes on.
×
×
  • Create New...