Jump to content
SAU Community

Engine 'stuttering?'

33Sedan

By 33Sedan,
in Australian Capital Territory

 Share

Recommended Posts

tridentt150v Grand Master

tridentt150v

Posted
Posted

Stuttering...........try speech therapy!!!

Sounds like coil/spark related otherwise. Might be just water in your spark plug well shorting your spark out on your head? If you drove it for a while you'd evaporate the water and it would come good.

noakespg Collaborator

noakespg

Posted
Posted (edited)

Hey mate,

As the others have said, coil packs or spark plugs. Its also worth unplugging the trigger module and plugging it back in. My plug wasn't plugged in properly and my car did the same thing.

Edited by noakespg
33Sedan Community Regular

33Sedan

Posted
  • Author
Posted

Haha speech therapy for my car sounds expensive!

I got it trucked over this morning, although when I moved it out of the garage, there was no stuttering.... Might have been tricking me though. Better safe then sorry I guess.

FUN FUN FUN

Will hear back from Trojan tomorrow or Thurs. Was hoping on buying some bits for it (finally have a small amount of money to spare), so hopefully won't be expensive and not ruin my fun.

33Sedan Community Regular

33Sedan

Posted
  • Author
Posted

I got the spark plugs done as well, all up costed just under 1k. Suspension is feeling wack now, hope nothing's wrong there. Oh and my radio antenae is having fun and not going up or down, instead just hear the little motor grinding ;-) FUN FUN FUN. Wonder if I will ever get a good couple of months problem free lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...