Jump to content
SAU Community

R33 Forged -$12,000

nathmacca
 Share

Recommended Posts

nathmacca Community Regular

nathmacca

Posted
Posted

I have for sale a 93 Nissan Skyline. The motor has been rebuilt with larger head gasket, acl race bearings,

forged pistons and a n1 oil pump while in bits the motor was chemically cleaned and the block was re-bored.

All was done approx 50,000kms ago. while this was done the gearbox was also rebuilt and fitted with a heavy duty clutch.

the turbo has been high flowed and has a larger actuator, cooled by a GReedy front mount cooler and custom air box,

excess air is released through a HKS super Seq blow off valve and exaust is taken care of by a 3 inch HKS exaust.

The car has a daughter board chip and apexi AVCR controls the boost and fuel, backed up by a malpassi fuel reg and 040 fuel pump.

BEST OF ALL RECIEPTS FOR EVERYTHING

The car has also been professionally lowered and has front and rear whileline strut brace's, it currently sits on mutli spoke 18's.

PRICE-$12,000

Call nathan on 0420443664 or email [email protected]

100_0273.jpg

100_0274.jpg

100_0280.jpg

100_0276.jpg

Link to comment
https://www.sau.com.au/forums/topic/284866-r33-forged-12000/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Recommendation for engine oil funnel spill free

      By PranK · Posted

      That's all I needed mate thanks.  For context, we've seen a big number of old accounts being hacked into and then used to post spam. I was wondering if yours had also.  I've never had a good funnel. My driveway can attest to that. 😔
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      I am not a spammer ,, all I can say I have been member of the forum since a while ,,,,and as admin you can verify the time of registration I have 5 funnels none of them fit firmly. Similar thread was posted on the forum below but  it is US based : https://www.f150gen14.com/forum/threads/no-more-spilled-oil-during-an-oil-change-spill-free-oil-funnel.26438/page-2
    • PranK
      Recommendation for engine oil funnel spill free

      By PranK · Posted

      Your post has me puzzled. I have a lot of "spammer" warning signs flashing at me.  Are you honestly, truly, asking for our feedback on oil funnels? For 4 completely different cars?  They're 20 bucks! Just buy one and see!  Maybe I'm missing something?  My finger is hovering above the "flag as spammer" button... Convince me not to click it.  
    • Kinkstaah
      Boost cut after swap(RB25DET NEO) R34

      By Kinkstaah · Posted

      I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
×
×
  • Create New...