Jump to content
SAU Community

Recommended Posts

As stated in title, wrecking a 1997 R33 SII Skyline.

The vehicle is black in colour and was a manual.

Most of the interior parts are still available. All panels and headlights on the front of the vehicle has been sold.

PM for any parts required.

Prefer pickup on heavy parts, but don't mind posting smaller trims.

Thanks!

Edited by DRFT33
Link to comment
https://www.sau.com.au/forums/topic/285065-wrecking-1997-r33-sii/
Share on other sites

hey mate just wondering if you still have the diff? if so does it have a 2 or 4 bolt rear hat that bolts it to the cradle? if it is 2 bolt which i think it will be would you be keen on selling/swapping just the rear cover, cheers. im in adelaide aswell by the way

As stated in title, wrecking a 1997 R33 SII Skyline.

The vehicle is black in colour and was a manual.

Most of the interior parts are still available. All panels and headlights on the front of the vehicle has been sold.

PM for any parts required.

Prefer pickup on heavy parts, but don't mind posting smaller trims.

Thanks!

As stated in title, wrecking a 1997 R33 SII Skyline.

The vehicle is black in colour and was a manual.

Most of the interior parts are still available. All panels and headlights on the front of the vehicle has been sold.

PM for any parts required.

Prefer pickup on heavy parts, but don't mind posting smaller trims.

Thanks!

disco potatoe - Sorry not seperating any engine parts but depends on what you're after? I have GT3582R turbo, X-Force high mount manifold, Tial 38mm wastegate, 3inch dump and screamer, braided oil and coolant lines for $2200. 80mm throttle body - $150. Let me know what you're after exactly.

pingping - I do have the ashtray. I can send you picture but it just looks like all the other ashtrays? Anyway - $20

Muges180 - As above, if pingping doesn't claim it, then the ashtray is yours for $20. Center console lid - $20

Zoidberg - Front and rear seats available. $150 for the lot. RHF seat has minor stitching come off about 1cm.

lolnic - $150 for all the seats if Zoidberg doesn't want them.

dor180 - Sorry, the locks have been sold.

2FST4U.R33 - handbrake tip available. The grip looks worn though? let me know how much you want to pay for it.

Turk1 - Sorry, front grille is gone.

Craig132 - Front brake calipers and rotors - $250. Rear brakes may have been sold but I will let you know.

codys97 - I'm not sure on the rear diff, I'll need to have a look but it is the VLSD (GTR rear diff) model so might be completely different from what you're after.

Darren33 - Not sure on what you're after buddy.

Bigmikespec, Aberax, Weezy, F9292 - trying to send PMs at the moment - will get one soon.

Hi there, i'm desperately looking for The R33GTS-T Crossmember, RB25DET Rubber Mounts & RB25DET Allumunium Engine Mountings, if you still have it i will take it. Please let me know ASAP. My email: [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...