Jump to content
SAU Community

Recommended Posts

Hi all,

I have been stock piling parts for an upcoming GTR purchase but right now I have other priorities, and given all this gear is simply sitting around decorating my office shelf and won't fit my evo, I am putting them all up for sale so jump on in and grab yourself a bargain :D

Lets get the ball rolling - This is the start of it, and there is more to come.

1. New Tomei RB26 Coil Cover Emblem/Badge

post-46-1251349375_thumb.jpg

Brand New Tomei valley/coil cover emblem badge for RB26DETT.

This was bought for my last GTR which had an engine packed with Tomei hardware but I didn't end up fitting it so/

its new in the box.

Asking $140.00 firm

2. New Japanese Clear Front Indicators - Skyline R32 GTS-T

post-46-1252287531_thumb.jpg

This is a brand new set of hard to find clear front indicators to suit R32 GTS-T only - Not compatible with BNR32.

Purchased from Japan, these are a straight fit replacement, look awesome fitted and take all of 5 minutes to install.

Bulbs included.

Asking $250.00 firm

3. Brand New Trust Suction/Full Intake Piping Kit - R32/R33/R34 GTR)

post-46-1253501961_thumb.jpg

Brand new Genuine Trust/Greddy Suction Kit to suit R32, R33 & R34 GTR.

This is the Z32 AFM Type Kit (Part Number: 12020902) and includes adapter plates and AFM plugs for vehicles that have upgraded to Z32 Air Flow Meters. This is one of the best looking and lightweight intake piping kits available, is simple to install and dramatically lifts the appearance of your engine bay!

post-46-1253503087_thumb.jpg

Kit includes the following:

- 2 x Airinx Air Filters AY-SB

- AFM adapter NS-07 (Z32 AFM )

- Suction tube

- Suction alloy elbow No 77 - 65 - 80 mm

- R suction allow elbow No 78 - 65 - 80mm

- Each pipe suction return recirclation buff type

- Compression tube. Allow Elbow No 79 - 60mm Flange attached

- Alloy 60mm/ Alloy 60mm x 2 - 80mm each Buff finish

- Recirculation hose Z32 AFM, Transform connector adapter

- Short parts kit

Asking $1180.00 firm

4. Brand New Tomei Expreme Turbine Outlet/Dump Pipes Set - R32/R33 GTR RB26

post-46-1251350972_thumb.jpg

When it comes to aftermarket dump pipes for RB26, Tomei Dump Pipes are absolute top shelf and the best you can buy, and these ones are the latest release version from Tomei for 2009 featuring the 'lost wax' coating and large open bellmouth design for optimal flow, as we as the highest quality Japanese craftsmanship of any other dump pipes on the market.

post-46-1251351292_thumb.jpg post-46-1251351303_thumb.jpg post-46-1251351311_thumb.jpg

More details here:

http://www.tomei-p.co.jp/_2003web-catalogu...preme_rset.html

This is the R32/R33 GTR kit (Part Number: 421101), and comes complete with new studs, bolts, gaskets and stickers.

Asking $890.00 firm (Pickup preferred but happy to post at buyers expense)

5. Brand New Genuine Nissan Crank Angle Sensor - R32 GTR

post-46-1251349161_thumb.jpg post-46-1251349170_thumb.jpg post-46-1251349198_thumb.jpg

Anyone that has had a problem with their crank angle sensor before knows that its a waste of time and FAR too risky to stuff around replacing a faulty CAS with another second hand unit, particularly on a built motor with a lot of money in it. Having been through this before I bought a brand new CAS for my BNR32 project now on hold.

There are 2 types of CAS used on BNR32, Hitachi or Mitsubishi Type, depending on weather your car is an early

or late model.

This is the Hitachi Type (Part Number:23731-08U00).

Retail from Nissan is approximately $1100.00, a little less for trade (Yes, you read correctly)

Due to needing to recover some funds quickly, im letting this go for a VERY reasonable price

Asking $495.00 firm

6. Brand New Genuine Nissan N1 Oil Pump (RRP $579.00!)

post-46-1253234959_thumb.jpg

Brand New - In Box and no longer required - No need to pay retail when my loss can be your gain!

Asking $399.00 firm

7. Used Splitfire Coil Packs (SF-DIS-001 Type)

post-46-1253487745_thumb.jpg

Good used set of Splitfire SF-DIS-001 Coil Packs to suit HCR32 RB20 & ECR33 RB25DET Series 1

Asking $430.00 firm

8. Genuine Ganador Aero Mirrors - R32 GTR Used

post-46-1255058510_thumb.jpg post-46-1255058519_thumb.jpg

One set of Genuine Ganador Electric Aero Mirrors for Skyline R32 GTR

They are in good overall condition and are a direct fit upgrade for your factory mirrors.

Painted in factory KLO Silver

I am selling these as my new BNR32 already has them ;)

Asking $410.00 firm

9. Genuine R34 GTR Engine Covers Set - 5 Piece (Including Valley Cover Badge)

post-46-1251349056_thumb.jpg

I have for sale a complete 5 piece set of Genuine R34 GTR Engine Covers from a BNR34. These covers are in very good condition and include the Skyline GTR valley cover badge.

These are extremely hard to come by, particularly as a complete set, and I spent a considerable amount of time hunting them down.

If you want to transform your engine bays appearance, you need these covers!

Asking $690.00 firm

10. Used Apexi Power FC - R32/R33 GTR RB26

post-46-1251349335_thumb.jpg

Standard version Power FC to suit BNR32 & BCNR33 GTR - No Hand Controller included

Asking $695.00 firm

11. Used Apexi Power FC PRO & Hand Controller - R32/R33 GTR RB26

post-46-1251350926_thumb.jpg

This is the real deal Power FC PRO with Hand Controller to suit BNR32 & BCNR33 GTR.

Power FC PRO2 Ver 4.41 currently running on it.

These are no longer available and rare as hens teeth.

Letting this one go as I already have the ECU I want in my new car so this is surplus

Asking $1280.00 firm

That's it for now, once I get back to my garage and sort through some bits and pieces I may update this thread.

Cheers all.

Nick

hey mate pm me ur mob ill hit you up about either one of the powerfc's

cheers

Hi,

I am interested in the Power FC. Please pm me or call Alex 0439818008

cheers

Thanks for all the pm's guy, replies have been sent to all.

All this gear has to go, give it a new home!

Hi Blitz,

Thanks for the PM yesterday, couldn't reply via PM as I don't have enough posts.

Will take the Power FC with hand controller please call me on 0413565327

Thanks

Will

Prices dropped on ARC Intercooler and New Genuine Nissan Crank Angle Sensor.

Both of these were already cheap and are now more so! Someone give them a new home :D

How often can u get power fcs that price for. would be interested in the future if u can get more around that price.

Hey Brent, the two I was selling were on hand for a GTR i was buying.

I sent you a pm though.

Cheers,

Nick

ARC Intercoolers are the best money can buy, and at this price, grab yourself an absolute bargain!

Plenty of interested parties - Someone give this puppy a new home.

:blink:

What condition are the 34 engine covers in?

they are in top condition, good price guys, these are getting really hard to come by in this condion...

gl with the sale, top quality gear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...