Jump to content
SAU Community

Recommended Posts

Hi crew,

My Silvertop RB20 is stalling when the car is warm.

Symptoms include:

Clutch in revs drop too low and the car stalls.

Eventually the car wont even idle.

I have new Splitfire coil packs and rebuilt injectors, and there is no missing in the revs under boost anywhere. (for those who know my car it gets alot of air and fuel in those cylinders :P )

My thoughts on this include, battery is not being charged by alternator, battery is dead, CAS f**ked or CAS wiring was f**ked up when I extended the wiring. Fuel pump is dyeing at low revs (12 month old Bosch 023) \ when heated up?

Remember, this only occurs when the engine is warmed up.

There also seems to be a voltage drop across the cars wiring, although this has occurred since I owned it.

Another thought is the 555cc RX7 injectors (rebuilt) and the Power FC not liking the de-celeration and turning the injectors off too long \ all together? I hear there are issues with this that cant be tuned out with the hardware on the FC.

Also, I do not have an IAC setup, only AAC (although I probably need the former more) This has not been a problem in the last 12 months before the last 2 weeks that I have noticed this.

Angry saw this occur 2 weeks ago, and today my missus took the car with me to work as hers is getting a new fuel pump.

At first Angry and I thought fouled plugs or lack of fuel, but the car did it at 1/2 tank this morning.

It could just be low fuel and the pump running out its supply, but crank it and it starts straight away and drives, drive on the highway without changing gear \ letting the revs drop and no problem.

It could also have a tune factor, since I fixed a leak in my intake manifold, but it is still weird to me.

Any thoughts to add to what I have described?

Cheers

-Jez

Link to comment
https://www.sau.com.au/forums/topic/285496-rb20det-stalling-only-when-hot/
Share on other sites

i reckon now the manifold is fixed the idle mixtures are whack as..... drop in fixed in a flash, and you know its not gonna cost anything.

Edited by URAS

this issue has been raised before too

one thing to look for is FPR (Fuel Pressure regulator), i am not that much mechanically minded as to how it works but i was reading a thread on Nissansilvia and a guy had the same issue with his CA18det which is prettty much a smaller version of RB's he changed his FPR and problem was solved. (however i would do the usual things first like clean AFM, throttle body, idle controller spring etc)

if i find the thread i'll link it

edit: heres the link

http://www.nissansilvia.com/forums/index.p...howtopic=398535

Edited by Sami

NO AFM, Throttle body was just cleaned...No Idle control, AAC was cleaned, as mentioned NO IAC....

ummm, not stock FPR due to AM Fuel rail...

And Nismoid STFU about stock reg, its not by choice!

Trent, Ill call you monday :P

Hey

I just went through this, Idled perfectly/strong on the cold start cycle, then hunted/died once warm. Disconnect your TPS once warm at idle and see if it idles. Mine did. Replaced TPS. I had a bad experience with a company(wrong part then three+ week wait for correct part then the plug is still wrong so we are still sorting that out) and I will PM you as they used to be a well regarded chain, now trading under another name in vic.

Best bet would be seeing is Streeter can source you one and send as they are ~150 new trade price here for the genuine part, or 200+ with a 2week wait through nissan.

Let me know how you go.

-Ryan

NO AFM, Throttle body was just cleaned...No Idle control, AAC was cleaned, as mentioned NO IAC....

ummm, not stock FPR due to AM Fuel rail...

And Nismoid STFU about stock reg, its not by choice!

Trent, Ill call you monday :)

:(

If its not the tune, then you might well have a voltage drop... in the 31 2-door?

I'm having voltage drop issues of my own when i use the windows causing it to dip a bit, nothing extra juice to the ECU wont fix though so that's something else to look into.

Why no IAC? How are you getting around it?

:)

If its not the tune, then you might well have a voltage drop... in the 31 2-door?

I'm having voltage drop issues of my own when i use the windows causing it to dip a bit, nothing extra juice to the ECU wont fix though so that's something else to look into.

Why no IAC? How are you getting around it?

Yup its in the HR, low revs, and you use something that needs some current, but it has been there for the 5 years I have owned the car. There is so much old wiring in these things its hard to track down. I previously got around it with a big ass battery but changed to a smaller one, now the battery is in a box in the boot so I could always buy a large commodore\falcon size battery.

No IAC because I just didn't really bother when putting the FF plenum on, it stood out like dogs balls on top of the plenum so I decided to tune without it. I may put it back in the system yet, but Trent seems to have worked around it.

Yup its in the HR, low revs, and you use something that needs some current, but it has been there for the 5 years I have owned the car. There is so much old wiring in these things its hard to track down. I previously got around it with a big ass battery but changed to a smaller one, now the battery is in a box in the boot so I could always buy a large commodore\falcon size battery.

No IAC because I just didn't really bother when putting the FF plenum on, it stood out like dogs balls on top of the plenum so I decided to tune without it. I may put it back in the system yet, but Trent seems to have worked around it.

You can give the ECU some extra power, i Andrew is rewiring my car tomorrow actually and we are gonna give the ECU a better feed rather than off the loom.

So should get rid of the drop, seems rather common actually more investigation i do into it :)

Yup sounds like the right thing to do :)

Previously bloke who owned the car had a Wolf V4 in it so the loom was hacked to shit, I ended up running a new loom to the fuse box when I put the Silvertop in a few years ago, and I couldnt get a ignition source so I ran one under the dash, but there is still issues elsewhere, could be on the alternator loom, not 100%, its the 3rd alternator in it too ;)

Yup sounds like the right thing to do :)

Previously bloke who owned the car had a Wolf V4 in it so the loom was hacked to shit, I ended up running a new loom to the fuse box when I put the Silvertop in a few years ago, and I couldnt get a ignition source so I ran one under the dash, but there is still issues elsewhere, could be on the alternator loom, not 100%, its the 3rd alternator in it too ;)

Time for a rebuilt beefed up alt? best thing ever in old cars!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...