Jump to content
SAU Community

32 Gtr Parts For Sale


Recommended Posts

Hey all,

Selling of parts from my R32 GTR, had engine bottom end failure so parting out. Make me some offers on the below :

Whats left :

The interior is pretty much all there EXCEPT for front seats, gear knob and door trim (doors are gone)

Front bar is gone as are the doors and boot lid, the gear box and front bar are gone.

So if it's not on the list below tell me what you're looking for and I will let you know if I have it... most likely will.

RB26DETT head (just been freshened up) $1800 complete.

Igniter pack $50

GTR turbo's, High Flowed BB Steel wheels. never boosted above 6 pounds.

ABS unit $offer?

NFU Coil overs Hight Adjustable (AWESOME ride the car handled like it was on rails) $1000

Stock GTR Cooler $100

Bonnet $550

grill $150

Rear seats (stitching loose up the top on one side) $offer?

Carpet all in good condition : $100

BRAKES : GTR Calipers, NEW DBA slotted rotors (just enough time to run my motor in and blow it up, so about 6000k's on them with no really hard breaking. new break pads (cant remember what brand they are, they are dirty pads but the stop hard. $1000 obo.

Vents left & centre -- $150 pair or $80ea

lower control arms -- $120

castor rods -- $100

Afm’s green label -- $100 ea

tail lights -- $150pair

indicators -- $75pair

3 inch exhaust all the way through (it’s flowy but pretty loud) -- $250

Complete engine harness. Price $250.00

Complete Chassis wiring from the head light to rear lights all fuse boxs etc. Price. $300.00

Gtr dash (buble in the usual spot but in great condition otherwise - $80

Gtr steering colum with ignition barrel. -$150

Gtr brake booster. - $60

Gtr clutch master cylinder with booster. - $50

Gtr brake and clutch pedals. - $30 each

Gtr front upper camber arms. - $100 pair

Gtr front castor arms. - $50 pair

Gtr heater box. - $70 fan - $30

Gtr centre gauges. - $50

Gtr power steering rack. - $100

Gtr power steering pump. - $50

Edited by BlackR32
Link to comment
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hey there,i will take the igniter pack, can u pm your details and price to post to goldcoast,thanks mate

Hey all,

Selling of parts from my R32 GTR, had engine bottom end failure so parting out. Make me some offers on the below :

Whats left :

The interior is pretty much all there EXCEPT for front seats, gear knob and door trim (doors are gone)

Front bar is gone as are the doors and boot lid, the gear box and front bar are gone.

So if it's not on the list below tell me what you're looking for and I will let you know if I have it... most likely will.

RB26DETT head (just been freshened up) $1800 complete.

Igniter pack $50

GTR turbo's, High Flowed BB Steel wheels. never boosted above 6 pounds.

ABS unit $offer?

NFU Coil overs Hight Adjustable (AWESOME ride the car handled like it was on rails) $1000

Stock GTR Cooler $100

Bonnet $550

grill $150

Rear seats (stitching loose up the top on one side) $offer?

Carpet all in good condition : $100

BRAKES : GTR Calipers, NEW DBA slotted rotors (just enough time to run my motor in and blow it up, so about 6000k's on them with no really hard breaking. new break pads (cant remember what brand they are, they are dirty pads but the stop hard. $1000 obo.

Vents left & centre -- $150 pair or $80ea

lower control arms -- $120

castor rods -- $100

Afm's green label -- $100 ea

tail lights -- $150pair

indicators -- $75pair

3 inch exhaust all the way through (it's flowy but pretty loud) -- $250

Complete engine harness. Price $250.00

Complete Chassis wiring from the head light to rear lights all fuse boxs etc. Price. $300.00

Gtr dash (buble in the usual spot but in great condition otherwise - $80

Gtr steering colum with ignition barrel. -$150

Gtr brake booster. - $60

Gtr clutch master cylinder with booster. - $50

Gtr brake and clutch pedals. - $30 each

Gtr front upper camber arms. - $100 pair

Gtr front castor arms. - $50 pair

Gtr heater box. - $70 fan - $30

Gtr centre gauges. - $50

Gtr power steering rack. - $100

Gtr power steering pump. - $50

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...